How to Disconnect a Golf Cart Reverse/Backup Buzzer (Steps)


ezygo golf cart backup buzzer

 

Where is the Reverse Buzzer Located on EZGO Golf Cart?

The reverse buzzer of your EZGO golf cart is known to be very annoying  due to the noise they produce. 

In this article I will show you how to disconnect it, along with my other favorite troubleshooting tips.

The reverse buzzer on a EZYGO golf cart is located behind the key switch panel.

Let me help you identify where the buzzer is located on the EZGO golf cart.

The reverse buzzer gives out an alarm when the cart is reversing, thereby cautioning those who might be standing behind the cart. The key switch panel is located on the right side of the cart opening.

The reverse buzzer on a EZY go golf cart is located behind this key switch panel. It is very easy to access this panel. You can locate this quite easily and get started to resolve the issues that you are facing due to the buzzer.

 

How To Disable the Backup Buzzer on an EZGO Golf Cart

It is very simple to disable the backup buzzer on the EZGO golf cart.

Please follow the steps below to disable the backup buzzer:

  1. Locate the ezygo buzzer and then disconnect or cut the wire.
  2. The key switch panel on the front can be opened using a screwdriver.
  3. Once you remove the panel, you will be able to see some wires running inside.
  4. The buzzer is quite easy to locate. It will be black and cylindrical. An orange-colored wire will be running from the right-side terminal of the buzzer.
  5. You will need to disconnect this wire to disable the backup buzzer.
  6. Once you are finished, just screw back the key switch plate ensuring that all other components are intact and you are good to go.

 

Where is the Backup Alarm Found on a Club Car Golf Cart?

The backup alarm in EZGO golf cart is located close to the buzzer.

When you unscrew the panel containing the key switch, you will be able to see several components. The reverse buzzer, as well as the backup alarm, can be found in this area.

The buzzer is the black colored cylindrical component with multiple wires connected to it. An orange wire with a white-colored shading will be connected to the controller. This is called the trigger wire.

Usually disconnecting the orange wire can help disconnect the backup alarm.

After disconnecting the buzzer alarm, it is important to be very careful while driving. Since the reverse sound will not be functional, it is important to take care while reversing the cart.

 

How to Disconnect Backup Beeper on a Club Car Golf Cart

Unfortunately the buzzer noise on a golf cart can quickly become an unbearable annoyance.

If you are one of the many golf cart owners who are suffering due to this loud noise, you’ll be happy to know that you can disconnect the backup buzzer on the cart. This is a simple job and can be done very easily.

  • You can locate the orange and white wire and disconnect it from the key switch panel.
  • This key switch panel is the panel that has the forward and reverse switch.
  • This will disconnect the backup buzzer but always make sure that you are clear with the reverse and normal drive modes to avoid any untoward accidents.

 

Where is the Backup Alarm on a Yamaha Golf Cart?

The backup alarm in a Yamaha golf cart is generally located behind the seat.

Removing the cup holder and raising the seat will give you access to the backup alarm. The alarm will have green as well as black wires running from it. This will be an easy identification that you can use to locate the backup buzzer.

Each model of the Yamaha golf cart will have some differences in the location or the model of the buzzer used, however, the basic structure will be the same. Usually, the buzzer will be connected to the F/R switch and the controller.

 

How to Disconnect Reverse Buzzer on Yamaha Golf Cart

If you wish to disconnect the reverse buzzer on a Yamaha model golf cart, locate the buzzer found below the cup holder. You will have to lift the seat and the cup holder to locate it.

The buzzer will have a green and black wire attached to it. You can disconnect this wire to stop the buzzer noise.

Alternatively, if you are just looking to reduce the sound of the buzzer, you can use a simple DIY trick. Using a few pieces of duct tape, you can tape the buzzer securely. This will reduce the noise to a great extent.

 

Why is Reverse Buzzer not Working?

The most common cause of a reverse buzzer not working on a golf cart is will be due to a fault with the controller.

  1. Check if the orange and white wire running from the buzzer has continuity and current runs through it. You can use a voltage meter to verify this.
  2. Next check if the voltage reading is 0 V. If this is the reading that is shown then the issue lies with the controller.
  3. You will have to replace the controller.
  4. If all the readings are normal, then the fault is with the buzzer and replacing it will solve the issue.

 

Fix a Club Car Buzzer Not Working

On a Club Car Golf Cart, the reverse buzzer can be found behind the cart seat. Remove the seat and you will be able to locate the buzzer.

Verify whether all the wires connected to the buzzer are properly in place. This issue can be caused mostly due to disconnected wires. Reconnecting them can fix this issue.

If the buzzer is working during certain times and doesn’t work at other times, then you will have to check the controller and the battery pack. If the wires from the battery pack are not connected properly, then the buzzer might have issues.

Loose contact with the wires may cause the buzzer to work intermittently. When all these measures fail, then you will have to replace either the buzzer or the controller to resolve the issue.

 

EZGO Buzzer Not Working

One of the commonly experienced issues with the EZGO cart is the buzzer not working when the cart is moving in reverse.

When you move the golf cart in reverse, a voltage will be sent from the F/R switch to the controller. This voltage will sound the buzzer and send the reverse current to enable the cart to move backward.

If the cart is moving in reverse but the buzzer is not sounding, then the issue lies with the controller. Get the controller checked for any problems.

In some cases, the solenoid may also be the issue. If you hear a ‘click’ sound while reversing the cart, then check the solenoid. Replacing the solenoid might solve the problem.

 

Columbia Summit Buzzer Not Working

If you are experiencing problems with the buzzer in a Columbia Summit golf cart, then here are some things you can do to rectify the issue.

  1. Locate the buzzer and check if all the wires are connected properly.
  2. Sometimes, the wires might have got disconnected from the buzzer thereby preventing the buzzer from sounding.
  3. Any issues with the voltages at the buzzer might also cause the buzzer to stop working.
  4. Check if the voltages are within the normal range. If it isn’t within range, you will have to replace the buzzer.

Another method that you can try is by disconnecting the battery and reconnecting all the wires back. Sometimes resetting the settings might help solve the issue.

Alternatively, you can try removing the gauge cluster located near the key switch and check all the connections.

Any issues with the gauge might also prevent the buzzer from sounding. Replacing it will help fix the issue.

 

How to Fix Reverse Buzzer That Always Stays on

If you are experiencing this issue where the buzzer is always on when the key is inserted, read on to find out how to solve it.

One of the common causes of this issue could be due to the wires having loose contact.

So, my first suggestion would be to disconnect all the wires and then reattach them. This might help resolve this issue. You can try pulling out the leads attached to the F/R switch and then reattach them.

If the issue is with the controller, there is nothing else you can do apart from getting it replaced. You can take your cart to the nearest service center and ask them to take a look at it if you are unable to identify the problem.

 

Turn Off Golf Cart Reverse Beep Sound

Sometimes the sound of the buzzer can be quite loud and irritating. If you are finding the noise to be too high and which to reduce it or turn it down, you follow these tips.

The best solution would be to reduce the buzzer as disconnecting it entirely might be a problem when you are backing in a public space.

You can attach a piece of foam or tape the speakers to reduce the volume. This will significantly bring down the volume of the buzzer thus making it bearable.

If you still wish to disconnect it completely, the buzzer can be found behind the dashboard and you can disconnect the wires to turn off the reverse beep sound.

 

Golf Cart Forward/Reverse Switch Wiring

Are you looking to change the reverse switch or the buzzer connected to it? Well, you can look up the manual to see the wiring. It is quite simple and easy to follow.

In short, if you are looking to change the F/R switch, then you need to ensure that the copper bar that comes with it is attached to both the verticals.

The jumper bar will help you to connect the wires. The top wires will be connected while the bottom 2 should also be connected.

One of the bottom wires will the reverse positive while the other wire would be the forward positive one. In general, if you have a 48V switch, then there will be a white wire and a blue wire.

The white wire will be used at the bottom and the blue one at the top of the switch. The wiring structure will remain the same for all the models, but there will be a few minor differences.

 

Golf Cart Forward/Reverse Switch Wiring Diagram

The forward and reverse switch is popularly known as the F/R switch is located in the dashboard and is connected to several components. A solenoid, controller, and the reverse buzzer are some of the components connected to the F/R switch.

If you wish to replace some parts of it or disconnect the buzzer, you will have to look up the wiring diagram. The wiring diagrams will be available in the user manual.

The general setup will be as follows. There will be at least 4 wires connecting from the power harness and there will be at least one wire connecting the buzzer.

A accessory harness will be connected using one wire. With this basic sketch in mind, it will be easy to follow the wiring diagram.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Content