Can you play with a cracked Callaway Rogue driver?
Yes, you may be able to play with a cracked Callaway Rogue driver if the crack is very small as it’s not likely to impact the game. However, if the crack is fairly large, it may not be possible to continue playing.
Most tournaments don’t allow golfers to continue playing if the driverhead cracks in the middle of a game.
Why is my Callaway Rogue golf driver cracking?
Your Callaway Rogue golf driver may be cracking because of the broken weld on the top line, bond failure with the cup-face to the body, thinning of the driver face or repeated hits over time.
In very rare cases, the cracking could be due to a manufacturing defect.
- Broken weld on top the line
- Bond failure with the cup-face to the body
- Repeated hits over time
Most golfers who have experienced cracks with their Callaway Rogue golf driver have opted to get it replaced rather than fixing them. They have found the Callaway customer care team extremely helpful in this regard.
Can you fix a cracked Callaway Rogue golf driver?
Yes, you can fix a cracked Callaway Rogue golf driver. You can either opt to do the fixing yourself or seek the assistance of the manufacturer’s personnel in this regard.
Callaway repairs or replaces any product as appropriate for free if the damage occurs due to normal use within two years of purchase.
However, you should have bought the driver from an authorized Callaway distributor or retailer.
How to fix a Callaway Rogue golf driver?
A cracked Callaway Rogue driver can be fixed using a few basic tools that are often readily available. It’s advisable to get help from the manufacturer’s service team first in this regard.
They will often be more than glad to do a replacement if the defect occurs during the warranty period with normal use.
You may need the following tools if you plan to attend to the crack yourself.
- Vise
- Tape
- Utility knife
- Butane torch or heat gun
- Epoxy
If the crack is of a hairline nature and is in line with the remaining surface, you may be able to seal it using just some epoxy alone.
How to fix a cracked Callaway Rogue golf driver head?
The Callaway Rogue golf driver comes with a fairly symmetrical triangular and shallow 460cc clubhead. The head shape is noticeably large at the address point.
The head has a glossy black finish and encompasses a carbon fiber crown. The deep and wide head renders better confidence at the address point.
Most of the weight is located in the perimeter of the clubhead that results in an increased moment of inertia. There is no sliding weight track at the rear of the clubhead. The screw at the back of the head can be loosened to remove the clubhead so that you can adjust the loft of the club.
The key reason why you may have a cracked Callaway Rogue golf driver head is because of metal fatigue and continuous contact with the golf ball.
Here is how you can fix the crack on the head of your Callaway Rogue golf driver.
- Secure the driver in place by fixing the shaft on a vise.
- Remove the clubhead from the club shaft.
- Check how deep the crack is and apply some epoxy to the crack on the driver head. Make sure you put the epoxy from the inside of the driver head.
- Allow the epoxy to dry and harden so that the crack gets sealed. It’s recommended that you wait for the drying time mentioned on the epoxy pack for the epoxy to dry completely. This will get you the best result for your fix.
Why does my Callaway Rogue driver head break off?
The Callaway Rogue driver head breaks off because of repeated contacts with the ground, poor swing technique and/or incorrect storage.
- Repeated contact with the ground
- Poor swing technique
- Incorrect storage
A driver head that breaks off can have an adverse effect on your swing style and speed. So, if you don’t have a proper swing style, a broken driver head can only make things worse. Your swing is likely to become inconsistent and lower your swing speed than usual.
Here are a few things to prevent or reduce the chances of your Callaway Rogue driver head breaking off:
A golf driver is not designed to make continuous or repeated contact with the ground. Such shots are called fat shots and can cause the head to break off from the shaft. This happens mainly because of incorrect positioning.
You should make sure that the ball isn’t placed too far ahead of you in your stance. Avoid leaning towards your dominant side and make sure your legs are centered with your head forward and shoulders level.
Get the assistance of a trainer to help you develop a proper swinging technique. There are various golf clubs that will be glad to help you avail the assistance of their trainers for a fee. You can alternatively spend some time in the range.
Make sure you store the Callaway Rogue driver in a safe place after you play your game. Although it might be tempting to keep them in the trunk of your car, it’s best that you don’t do so.
The temperature inside the car can rise abnormally during summer, causing the epoxy to deteriorate over time. This is the epoxy that holds the clubhead onto the shaft.
When the epoxy dries up, the clubhead becomes loose and eventually falls off. Store the driver in a cool place like a garage.
It’s a good idea to check the screw behind the driver head from time to time to see if it has become loose. This is the screw that you will loosen to release the clubhead for adjustment. If it’s loose, the clubhead can slip and fall off, resulting in it getting broken.
How to fix a Callaway Rogue driver face that is cracking?
The Callaway Rogue driver face is that part of the driver which makes contact with the golf ball. This is therefore a vital reason why the driver face is prone to wear and tear or cracks.
Depending on the nature of the crack, you can get a replacement or fix it yourself.
Here is how you can repair a cracking Callaway Rogue driver face:
- Apply a suitable epoxy on the hairline crack from the inside and allow it to dry for the duration specified on the epoxy pack without rushing through and using the driver before this period.
- Check with the manufacturer if it’s more appropriate to opt for a replacement or a change.
A replacement is more often needed when the crack is bigger than a hairline and the driver face features a hole or a raised sharp edge.
Often, the manufacturer will opt for a replacement if the driver is within the two-year warranty period or the crack is due to natural wear and tear.
If it’s out of the warranty bracket or due to a hit on a hard surface, the manufacturer will change it for a fee.
Various forum studies show that users prefer approaching the manufacturer for a solution instead of trying to fix the driver themselves.
How to Fix a Small Hairline Crack in Golf Driver?
A hairline crack in the golf driver refers to a thin crack in line with the surface on which the crack is present. This crack often occurs between the grip and shaft of your Callaway Rogue driver.
You can get a replacement from Callaway if your driver is within the warranty period.
There are many reasons why your golf driver has developed a hairline crack. Some prominent causes for such a crack are given below.
- Fat shots
- Improper swinging style
- Incorrect storage
- Exposure to harsh elements of nature
- Wear and tear because of prolonged or extensive use
The following steps can guide you on how to fix the hairline crack yourself with some epoxy. You have to ensure that you use the right epoxy for the job.
- Soak the driver in some water to loosen the dirt accumulated on its surface and in the hairline crack.
- Wipe the driver dry with a clean cloth.
- Apply some epoxy such as Araldite on the hairline crack from the inside.
- Set the driver aside and allow the epoxy to dry completely. Most epoxy packs mention the drying time required and it’s advisable not to use the driver before this time.
It’s not against the rules of golf to use a driver with a hairline crack. However, if you continue to use the driver this way, this can affect the performance of your game in the long run. The crack can widen and lead to complete breakage. If the driver breaks during the game, it can cause injury to the golfer.
Can you fix a broken shaft on a Callaway Rogue driver?
It’s hard to fix a broken shaft on a Callaway Rogue driver. This is due to it’s graphite shaft. The best option is to take the driver to the manufacturer’s service team for a free replacement if the driver is within the warranty duration.
If you decide to take it to a club fitting team, they may charge you a fee.
How to fix a broken Callaway Rogue driver shaft
As mentioned above, it’s recommended that you take the driver to the manufacturer’s service team for a replacement.
Playing with a broken shaft can affect the integrity of the game. However, if you use the right tools and take the required precautionary measures, you can embark on a do-it-yourself project.
Why is my Callaway Rogue driver head making a rattling noise?
Your Callaway Rogue driver may be making rattling noise because of loose screws or loose particles inside the driver head. These problems are quite common if you have a driver that is more than five years old.
- Loose screws
- Loose particles inside the clubhead
Check for loose screws on the clubhead and tighten them. One screw that you should particularly pay attention to is the screw at the rear of the head. You will have to loosen this screw if you have removed the clubhead to adjust the loft.
A rattle off and on when you play a game is because the glue filling inside the Callaway Rogue driver head has come off loose. You can try removing the existing glue particles and filling the head with some rat glue.
If this still doesn’t solve the problem, try opting for some foam fillers to fill the driver head. However, keep in mind that using such fillers can affect the overall acoustics of the driver.
The rattle may or may not have an impact on your swing. If the rattle is due to loose inner particles, there isn’t likely to be an impact on the swing. However, the sound can be irritating and prevent you from playing the game well.
On the other hand, unattended loose screws can make the clubhead become loose and/or even fall off thereby affecting the swing.
How to Replace a Callaway Rogue driver shaft?
You can try replacing the shaft of a Callaway Rogue driver using some basic tools that are readily available. However, you must take extra care when you do so to avoid damaging the new shaft in the process.
Tools Needed
- Utility knife
- Sandpaper
- Wire brush
- Shaft epoxy
- Soft cloth
- Shaft clamp
The following steps walk you through the process of replacing the shaft of your Callaway Rogue driver.
- Cut the ferrule from around the hosel using a utility knife.
- Secure the driver firmly in place by locking the shaft with a shaft clamp.
- Loosen the screw behind the clubhead and remove it from the shaft. You must take care not to drop the clubhead in the process.
- Remove the paint and polyurethane present at the new shaft tip using the utility knife. Make sure that you don’t cut deep into the shaft.
- Remove the epoxy using sandpaper. You can use a wire brush to get rid of the epoxy from inside the hosel.
- Mix the shaft epoxy according to the manufacturer’s instructions and apply it inside the new ferrule.
- Slide the ferrule over the shaft at the narrow end.
- Add some epoxy to the tip of the shaft and rotate it a couple of times in either direction for uniform spreading around the hosel.
- Push the shaft into the base of the driver hosel.
- Release the driver from the shaft club and set it aside vertically with the grip end on the floor.
- Push the shaft into the clubhead and tighten the screw to lock the clubhead ensuring that the ferrule is at the right position on the hosel.
- Wipe off the excess epoxy with a soft cloth and allow the epoxy to dry for the specified duration.