The Titleist KnowRight Metal Woods — Driver uses a 57° lie-angle reference. This guide focuses on this model’s actual specification, dynamic fit and the correct adjustment route.
Driver • Released 1996
KnowRight Metal Woods — Driver lie-angle fingerprint
What stands out about the KnowRight Metal Woods — Driver lie setup?
The available specification gives this model a 57° lie reference rather than a full progression.
On a driver, lie is a secondary tuning variable; face angle, face-to-path, strike and delivered loft usually dominate the shot.
Treat the head as fixed for lie unless Titleist documents an indexed adjustment system for the exact version.
Lie angle reference
| Standard lie | 57° |
|---|
Lie reference visual
Should the Titleist KnowRight Metal Woods — Driver be more upright or flatter?
A more upright fit may help when…
- A fitter confirms the fixed head fits too flat dynamically
- Another factory build produces better centre contact
A flatter fit may help when…
- A fitter confirms the fixed head fits too upright dynamically
- Another factory build produces better centre contact
Do not change lie just because…
- You plan to bend a fixed wood / hybrid head
- You have no repeatable strike baseline
Playing length reference
| Club / head | Length |
|---|---|
| 12° head | 43.5 in |
| 12D | 42.5 in |
Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one lie correction across the whole family.
Dynamic lie changes with delivery, shaft deflection, playing length and setup. For SureFit metals, use the Titleist chart for the exact category and handedness. For irons, wedges and putters, use a qualified fitter or putter technician before bending. Titleist SureFit guide.