Titleist KnowRight Metal Woods — Driver Loft Chart

The Titleist KnowRight Metal Woods driver is offered in 2 factory lofts from 12° to 12°, a 0° tight loft window. The 12° head is the stronger option, while 12° adds 0° of static loft for a higher launch starting point.

Titleist Driver Loft Guide
12°Lowest Factory Loft
12°–12°Factory Loft Range
Median Loft Gap
2Loft Options

KnowRight Metal Woods — Driver Loft Chart

Club Loft Gap
12° head 12°
12D head 12°
12° head: 12°.
Range: 12°–12° (0° total span).
Gapping: Every adjacent loft is spaced by 0°.

KnowRight Metal Woods — Driver loft flight map

The bars place each factory head on the same driver-loft scale, so the visual difference is not exaggerated. Lower loft generally favors a flatter launch and less spin; higher loft generally adds launch, spin and carry height.

12° head
12°
Higher launch
12D head
12°
Higher launch
What stands out: The loft progression is perfectly even at 0° per step. From the lowest to highest option, the total change is .
Loft spreadThe factory choices cover , from 12° to 12°. That is a fairly tight range for choosing launch window before any hosel adjustment is considered.
Choice spacingAdjacent factory lofts are separated by about throughout. A 1°–1.5° change is usually a meaningful fitting step; larger jumps create more distinct head choices.
12° vs 12°The 12° option is the lower-loft starting point; 12° gives 0° more static loft. Use that difference to narrow candidates before worrying about shaft or sleeve settings.
Practical takeaway: Do not assume the lowest loft is the ‘best’ or longest KnowRight Metal Woods — Driver. Loft should match delivered dynamic loft, strike and speed; the chart is most useful for identifying the correct factory head to start testing.

KnowRight Metal Woods — Driver vs other Titleist driver lofts

Model Reference Loft Difference
KnowRight Metal Woods — Driver 12° head 12° This model
C16 Driver 9° head 3° lower loft
DTR Midsize Metals — Driver 9.5° head 9.5° 2.5° lower loft
TS1 9.5° head 9.5° 2.5° lower loft
GT280 Mini Driver 13° head 13° 1° higher loft

How each KnowRight Metal Woods — Driver loft changes the shot

Club Loft What that loft changes
12° head 12° This is the higher-launch end of the driver range and gives the most static loft at address. Compared with the other heads here, expect launch, spin and peak height to generally rise as you move upward in loft.
12D head 12° This is the higher-launch end of the driver range and gives the most static loft at address. Compared with the other heads here, expect launch, spin and peak height to generally rise as you move upward in loft.

Static loft is the starting point, not the final ball flight. Delivered loft, strike location and hosel setting can move launch and spin enough that two golfers using the same head loft can get very different results.

Titleist KnowRight Metal Woods loft FAQs

What lofts does the Titleist KnowRight Metal Woods come in?

The listed factory lofts are 12° and 12°.

What is the loft range of the KnowRight Metal Woods?

It runs from 12° to 12°, a total span of 0°.

How much does one loft step change the KnowRight Metal Woods?

The typical factory step is . That is enough to change the launch and spin starting point, but delivered loft and strike can easily matter just as much.

Which KnowRight Metal Woods loft should launch highest?

The 12° head has the most static loft and should generally launch highest, all else equal.

Is the lowest-loft KnowRight Metal Woods automatically the longest?

No. Too little loft can reduce carry if launch gets too low or strike quality falls off. The longest setup is the one that produces the best launch, spin and contact for your delivery.

Spec & fitting disclaimer: Loft can vary by year, region, handedness or custom setup. Adjustable hosels and bending can also change playing loft. Verify your exact club before adjusting or ordering replacements.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts