TaylorMade r7 quad Driver Specs (Loft | Length | Lie Angle)

The TaylorMade r7 quad Driver combines a 400 cc head, loft options of 7.5°, 8.5°, 9.5°, 10.5° and 11.5°, a standard length of 45 in, and a listed swing weight of D3.

TaylorMade Driver Specifications

Driver • 2005 • Fixed hosel

Head size: 400 ccAvailable lofts: 7.5°, 8.5°, 9.5°, 10.5°, 11.5°Length: 45 inSwing weight: D3

Key specifications

DriverClub type

400 ccHead size

7.5°, 8.5°, 9.5°, 10.5°, 11.5°Available lofts

Fixed hoselLoft adjustability

59°Lie angle

45 inStandard length

D3Swing weight

Visual model specs

Built only from this model’s supplied specifications.

Loft options

5 available lofts spanning 7.5° to 11.5°.

7.5°

8.5°

9.5°

10.5°

11.5°

Model spec snapshot

Representative numeric specifications from this model.

400ccHead

59°Lie

45 inLength

How the TaylorMade r7 quad Driver compares

This compares the baseline specification with other TaylorMade drivers in this database. Driver loft comparisons use the lowest stated loft.

Head size

400 cc

8% below avg

14th percentile

Lowest stated loft

7.5 °

18% below avg

4th percentile

Lie angle

59 °

In line with avg

41st percentile

Standard length

45 in

In line with avg

29th percentile

Head size400 cc

Low 286 ccAverage 436 ccHigh 460 cc

About 8% smaller than the TaylorMade drivers database average. Around the 14th percentile for this field.

Lowest stated loft7.5 °

Low 7.5 °Average 9.1 °High 12 °

About 18% lower loft than the TaylorMade drivers database average. Around the 4th percentile for this field.

Lie angle59 °

Low 57 °Average 59.2 °High 61 °

Very close to the TaylorMade drivers database average. Around the 41st percentile for this field.

Standard length45 in

Low 43.17 inAverage 45.21 inHigh 46 in

Very close to the TaylorMade drivers database average. Around the 29th percentile for this field.

This model TaylorMade average

Club information

Manufacturer	TaylorMade
Model	r7 quad Driver
Club type	Driver
Release year	2005

Head, loft and weighting

Head size	400 cc
Available lofts	7.5°; 8.5°; 9.5°; 10.5°; 11.5°
Loft adjustability	Fixed hosel
Lie angle	59°
Swing weight	D3

Shaft, grip and setup

Standard length	45 in
Stock shaft options	MAS² 7-65
Stock grip	TaylorMade TGT
Hand availability	7.5:RH; 8.5:RH; 9.5:RH/LH; 10.5:RH/LH; 11.5:RH

Shaft and grip details

Shaft flexes	TS; S; R; M
Shaft weight	65 g
Shaft torque	2.8-2.9°
Grip weight	50 g

Adjustability and weighting

Hosel adjustable	No
Movable weight system	MWT – four ports / six standard trajectories

Head design and materials

Driver subtype	r7 quad titanium driver
Face material	Titanium
Face technology	Inverted Cone Technology
Body material	Titanium
Construction	400cc titanium with four movable-weight ports

Performance profile and technologies

Flight bias	Adjustable neutral/draw/fade
Target player	Broad fitting range
Technologies	Movable Weight Technology (MWT); Inverted Cone Technology; Pull-Face

Disclaimer: Driver specifications can vary by model year, loft, shaft, flex, hand and market. Verify important specifications against official TaylorMade documentation and the official TaylorMade website.