TaylorMade R510 TP Driver Specs (Loft | Length | Lie Angle)

The TaylorMade R510 TP Driver combines a 390 cc head, loft options of 7.5°, 8.5°, 9°, 9.5° and 10.5°, a standard length of 45 in, and a listed swing weight of D2.

TaylorMade Driver Specifications

Driver • 2003 • Fixed hosel

Head size: 390 ccAvailable lofts: 7.5°, 8.5°, 9°, 9.5°, 10.5°Length: 45 inSwing weight: D2

Key specifications

DriverClub type
390 ccHead size
7.5°, 8.5°, 9°, 9.5°, 10.5°Available lofts
Fixed hoselLoft adjustability
59°Lie angle
45 inStandard length
D2Swing weight

Visual model specs

Built only from this model’s supplied specifications.

Loft options
5 available lofts spanning 7.5° to 10.5°.
7.5°
8.5°
9.5°
10.5°
Model spec snapshot
Representative numeric specifications from this model.
390ccHead
59°Lie
45 inLength

How the TaylorMade R510 TP Driver compares

This compares the baseline specification with other TaylorMade drivers in this database. Driver loft comparisons use the lowest stated loft.

Head size
390 cc
11% below avg
12th percentile
Lowest stated loft
7.5 °
18% below avg
4th percentile
Lie angle
59 °
In line with avg
41st percentile
Standard length
45 in
In line with avg
29th percentile
Head size390 cc
Low 286 ccAverage 436 ccHigh 460 cc

About 11% smaller than the TaylorMade drivers database average. Around the 12th percentile for this field.

Lowest stated loft7.5 °
Low 7.5 °Average 9.1 °High 12 °

About 18% lower loft than the TaylorMade drivers database average. Around the 4th percentile for this field.

Lie angle59 °
Low 57 °Average 59.2 °High 61 °

Very close to the TaylorMade drivers database average. Around the 41st percentile for this field.

Standard length45 in
Low 43.17 inAverage 45.21 inHigh 46 in

Very close to the TaylorMade drivers database average. Around the 29th percentile for this field.

This model TaylorMade average

Club information

Manufacturer TaylorMade
Model R510 TP Driver
Club type Driver
Release year 2003

Head, loft and weighting

Head size 390 cc
Available lofts 7.5°; 8.5°; 9°; 9.5°; 10.5°
Loft adjustability Fixed hosel
Lie angle 59°
Swing weight D2

Shaft, grip and setup

Standard length 45 in
Stock shaft options Fujikura Speeder 757
Stock grip TaylorMade Tour Velvet
Hand availability 7.5:RH; 8.5:RH; 9:LH; 9.5:RH; 10.5:RH

Shaft and grip details

Shaft flexes X; S; R
Shaft weight 79 g; 77 g; 74 g
Shaft torque 2.5°

Adjustability and weighting

Hosel adjustable No

Head design and materials

Driver subtype Tour Preferred titanium driver
Face material Titanium
Face technology Inverted Cone Technology; ICT
Crown material Titanium
Body material Titanium
Sole material Titanium
Construction Titanium TP head with deep face
Head shape Compact traditional TP; 60cc larger than original R510

Performance profile and technologies

Launch profile Low-Mid
Spin profile Low
Flight bias Neutral / workable
Target player Better players / tour
CG claim Forward CG / penetrating trajectory
Technologies Inverted Cone Technology (ICT); Tuned Weight Cartridge (TWC)

Disclaimer: Driver specifications can vary by model year, loft, shaft, flex, hand and market. Verify important specifications against official TaylorMade documentation and the official TaylorMade website.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts