PING ISI Loft Chart

The PING ISI iron lineup runs from 15.5° to 61° across 15 factory loft options. The 7-iron is 34.5° and the highest-lofted option is the lob wedge at 61°.

PING Iron Loft Guide

ISI Lofts & Loft Chart

Factory loft map and model-specific gap analysis

34.5°7-Iron Loft
15.5°–61°Factory Loft Range
3.2°Median Loft Gap
15Loft Options

ISI Loft Chart

Club Loft Loft Gap Gap Read
1i 15.5°
2i 18° 2.5° Tighter than model median
3i 20.5° 2.5° Tighter than model median
4i 24° 3.5° Near model median
5i 27° Near model median
6i 30.5° 3.5° Near model median
7i 34.5° Wider than model median
8i 38.5° Wider than model median
9i 42.5° Wider than model median
PW 47° 4.5° Wider than model median
UW 49.5° 2.5° Tighter than model median
SW 52° 2.5° Tighter than model median
S2 54.5° 2.5° Tighter than model median
S3 57° 2.5° Tighter than model median
LW 61° Wider than model median

What stands out about the ISI loft?

Benchmark loft: The 7-iron is 34.5°, which is 0.5° higher loft than the typical 34° PING 7-iron.
Gap pattern: The loft steps vary from 2.5° to 4.5°, with a 3.2° median.

ISI loft progression

1i 15.5° → 2i 18° → 3i 20.5° → 4i 24° → 5i 27° → 6i 30.5° → 7i 34.5° → 8i 38.5° → 9i 42.5° → PW 47° → UW 49.5° → SW 52° → S2 54.5° → S3 57° → LW 61°

Where do the ISI loft gaps change?

The tightest gap is 2.5° between the 1-iron and 2-iron. The widest is 4.5° between the 9-iron and pitching wedge. The median step is 3.2°.

ISI vs other PING iron lofts

This comparison uses the same benchmark club where possible and shows nearby lower, similar and higher PING lofts when available.

PING Model Benchmark Club Loft Difference
Blueprint 7i 34° 0.5° lower loft
S56 7i 34.2° 0.3° lower loft
ISI 7i 34.5° This model
ISI BeCu 7i 34.5° Same loft
ISI K 7i 34.5° Same loft
Prodi G 7i 35° 0.5° higher loft

Which ISI club has each loft?

  • 15.5° = 1-iron.
  • 18° = 2-iron.
  • 20.5° = 3-iron.
  • 24° = 4-iron.
  • 27° = 5-iron.
  • 30.5° = 6-iron.
  • 34.5° = 7-iron.
  • 38.5° = 8-iron.
  • 42.5° = 9-iron.
  • 47° = pitching wedge.
  • 49.5° = utility wedge.
  • 52° = sand wedge.
  • 54.5° = S2.
  • 57° = S3.
  • 61° = lob wedge.

Individual ISI loft answers

What loft is the PING ISI 1-iron?

The ISI 1-iron is 15.5°. It is the lowest-lofted option in this model.

What loft is the PING ISI 2-iron?

The ISI 2-iron is 18°. It has 2.5° more loft than the 1-iron.

What loft is the PING ISI 3-iron?

The ISI 3-iron is 20.5°. It has 2.5° more loft than the 2-iron.

What loft is the PING ISI 4-iron?

The ISI 4-iron is 24°. It has 3.5° more loft than the 3-iron.

What loft is the PING ISI 5-iron?

The ISI 5-iron is 27°. It has 3° more loft than the 4-iron.

What loft is the PING ISI 6-iron?

The ISI 6-iron is 30.5°. It has 3.5° more loft than the 5-iron.

What loft is the PING ISI 7-iron?

The ISI 7-iron is 34.5°. It has 4° more loft than the 6-iron.

What loft is the PING ISI 8-iron?

The ISI 8-iron is 38.5°. It has 4° more loft than the 7-iron.

What loft is the PING ISI 9-iron?

The ISI 9-iron is 42.5°. It has 4° more loft than the 8-iron.

What loft is the PING ISI pitching wedge?

The ISI pitching wedge is 47°. It has 4.5° more loft than the 9-iron.

What loft is the PING ISI utility wedge?

The ISI utility wedge is 49.5°. It has 2.5° more loft than the pitching wedge.

What loft is the PING ISI sand wedge?

The ISI sand wedge is 52°. It has 2.5° more loft than the utility wedge.

What loft is the PING ISI S2?

The ISI S2 is 54.5°. It has 2.5° more loft than the sand wedge.

What loft is the PING ISI S3?

The ISI S3 is 57°. It has 2.5° more loft than the S2.

What loft is the PING ISI lob wedge?

The ISI lob wedge is 61°. It has 4° more loft than the S3.

ISI Loft Intelligence

These derived specs show how the numbered irons are structured beyond the raw loft chart.

7-ironBenchmark Iron
34.5° loft
0.5° strongerTraditional Loft Shift
vs ~35° traditional 7i
3.5° medianNumbered-Iron Gap
3.5° average
61.8/100Loft Consistency
Moderately varied
Strength fingerprint: The 7-iron is 34.5°. In static loft it is closest to a traditional 7-iron at about 35°.

Iron-only spacing: The tightest numbered-iron gap is 2.5° from 2i to 3i; the widest is 4° from 6i to 7i.

Loft Consistency Score: 61.8/100. This derived score measures variation in numbered-iron loft gaps; 100 means perfectly even spacing.

How the ISI lofts affect the shot

Loft is one of the biggest inputs into launch, trajectory, rollout and stopping power. The table below translates each ISI loft into its likely loft-only shot tendency.

15.5°Lowest-Loft Shot
Low launch • Higher roll
61°Highest-Loft Shot
Very high launch • Maximum stopping
45.5°Flight-Window Change
Low → Very high launch tendency
15 loftsShot Bias
Distance → control as loft increases
Model shot profile: Across the 45.5° loft span, the model moves from the 1-iron at 15.5° (low launch / higher roll tendency) to the lob wedge at 61° (very high launch / maximum stopping tendency). That is the core shot-shape trade-off created by the loft progression.
Club Loft Launch Tendency Flight Window Roll Tendency Stopping Tendency Loft-Driven Role
1i 15.5° Low Penetrating Higher Low Long-iron distance slot
2i 18° Low Penetrating Higher Low Long-iron distance slot
3i 20.5° Low–mid Strong Moderate–high Low–moderate Long-iron slot
4i 24° Low–mid Strong Moderate–high Low–moderate Long-iron slot
5i 27° Mid–low Strong / flat Moderate Moderate Distance-biased mid/long iron
6i 30.5° Mid Balanced Moderate Moderate–high Mid-iron scoring transition
7i 34.5° Mid–high Higher Low–moderate High Control-oriented mid/short iron
8i 38.5° High High / soft Lower High Short-iron approach slot
9i 42.5° High High / steep Low Very high Scoring-iron / pitching slot
PW 47° Very high Very high / steep Very low Very high Gap-control / scoring slot
UW 49.5° Very high Very high / steep Very low Very high Gap-control / scoring slot
SW 52° Very high Maximum-height / steep Minimal Maximum Short-game / maximum-control slot
S2 54.5° Very high Maximum-height / steep Minimal Maximum Short-game / maximum-control slot
S3 57° Very high Maximum-height / steep Minimal Maximum Short-game / maximum-control slot
LW 61° Very high Maximum-height / steep Minimal Maximum Short-game / maximum-control slot

What the loft gaps mean for shot separation

  • 1-iron → 2-iron: 2.5° — Tight loft step — higher chance of compressed carry spacing.
  • 2-iron → 3-iron: 2.5° — Tight loft step — higher chance of compressed carry spacing.
  • 3-iron → 4-iron: 3.5° — Normal-to-moderate loft step — usually a balanced transition.
  • 4-iron → 5-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
  • 5-iron → 6-iron: 3.5° — Normal-to-moderate loft step — usually a balanced transition.
  • 6-iron → 7-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • 7-iron → 8-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • 8-iron → 9-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • 9-iron → pitching wedge: 4.5° — Wider loft step — worth checking carry distance for a larger jump.
  • pitching wedge → utility wedge: 2.5° — Tight loft step — higher chance of compressed carry spacing.
  • utility wedge → sand wedge: 2.5° — Tight loft step — higher chance of compressed carry spacing.
  • sand wedge → S2: 2.5° — Tight loft step — higher chance of compressed carry spacing.
  • S2 → S3: 2.5° — Tight loft step — higher chance of compressed carry spacing.
  • S3 → lob wedge: 4° — Normal-to-moderate loft step — usually a balanced transition.

Iron note: Stronger lofts generally lower the launch/flight window and increase distance potential, while weaker lofts generally raise flight and stopping power. Modern iron head design can counteract some of that, so this is a loft-only tendency rather than a measured launch result.

Where the set changes from distance to control

By loft alone, the distance-biased part of the numbered set extends through roughly the 5-iron at 27°. By the 7-iron at 34.5°, the loft profile is clearly moving toward higher launch, steeper descent and stronger green-holding tendency.

ISI distance-to-control map

Part of lineup Reference club Loft What the loft favors
Distance end 1-iron 15.5° Low launch, higher roll, stronger distance bias
Middle 8-iron 38.5° High launch, more balanced carry/control role
Control end lob wedge 61° Very high launch, maximum stopping tendency, stronger control bias

Spec note: Loft can vary with model year, region, special configuration or custom fitting. Verify an exact club against PING documentation or measurement when a single degree matters.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts