The Cobra Speed Pro D driver has 2 listed factory loft options. The listed lofts are 8.5° and 9.5°. The chart focuses on the stated head lofts themselves; actual launch and spin still depend on delivery, strike and the rest of the build.
Speed Pro D Loft Chart
| Option | Loft | Gap |
|---|---|---|
| Option 1 | 8.5° | — |
| Option 2 | 9.5° | 1° |
Range: 8.5°–9.5° (1° total span).
Gapping: The median gap between adjacent listed lofts is 1°.
Speed Pro D Relative Loft Map
These bars compare the listed lofts relative to each other inside this model. They are not measured performance outputs.
Speed Pro D Launch, Spin & Trajectory Snapshot
These bars show the relative tendencies of the listed lofts within this model. They are not launch-monitor measurements; they simply visualize the practical difference between stronger and weaker lofts.
Lower
Lower
Flatter
Higher
Higher
Higher
How to use it: Use the lower lofts for a stronger, flatter starting point and the higher lofts for easier launch. Actual ball flight still depends heavily on delivered loft and strike.
Loft Spread
The listed lofts cover 1°, from 8.5° to 9.5°.
Choice Spacing
The adjacent listed loft gaps run from 1° to 1°, with a median of 1°.
8.5° vs 9.5°
Moving from 8.5° to 9.5° adds 1° of static loft. The higher-loft option generally starts from an easier-launching, higher-spin baseline.
Speed Pro D vs Other Cobra Driver Lofts
This comparison uses each model’s lowest listed loft so the numbers are on the same basis.
| Model | Lowest Loft | Difference |
|---|---|---|
| Speed Pro D | 8.5° | This model |
| 414 Comp Tour | 8.5° | Same lowest loft |
| HS9 X | 8.5° | Same lowest loft |
| L5V | 8.5° | Same lowest loft |
| S2 | 8.5° | Same lowest loft |
How Each Speed Pro D Loft Changes the Starting Point
| Option | Loft | What it means |
|---|---|---|
| Option 1 | 8.5° | This is the strongest listed loft and the lowest-launching starting point within the model. |
| Option 2 | 9.5° | This is the weakest listed loft and the easiest-launching starting point within the model. |
Cobra Speed Pro D Loft FAQs
What lofts does the Cobra Speed Pro D come in?
The listed lofts are 8.5° and 9.5°.
What is the loft range of the Speed Pro D?
It runs from 8.5° to 9.5°, a 1° total span.
What is the typical loft gap?
The median adjacent loft gap is 1°.
Which Speed Pro D loft should launch highest?
The 9.5° option is the highest listed loft and should provide the highest-launching starting point, all else equal.
Can you adjust the loft?
No user-adjustable loft sleeve is fitted to the Speed Pro D. Its loft is set by the head. There is no hosel ring to rotate: changing shafts does not change the head’s loft, and a driver/fairway/hybrid hosel should not be bent like an iron. To materially change loft, use a different factory-loft head/model or have a qualified fitter confirm whether any specialist modification is possible.
Does more loft always mean a better result?
No. The best loft depends on the club type, player delivery, strike and the distance or trajectory window you are trying to hit.
Spec & fitting disclaimer: Loft availability and specifications can vary by year, region, handedness and configuration. Verify the exact club with Cobra’s official documentation or an authorized fitter before ordering or adjusting equipment.