The Titleist Vokey 200 Series — Raw Wedge uses a 64° lie-angle reference. This guide focuses on this model’s actual specification, dynamic fit and the correct adjustment route.
Wedge • Released 2000
Vokey 200 Series — Raw lie-angle fingerprint
What stands out about the Vokey 200 Series — Raw lie setup?
The available specification gives this model a 64° lie reference rather than a full progression.
Wedge lie deserves extra attention because high loft magnifies face-direction change and small start-line errors matter close to the target.
Any lie change should be made by a qualified club fitter using a loft-and-lie machine.
Lie angle reference
| Standard lie | 64° |
|---|
Lie reference visual
Vokey 200 Series — Raw directional effect from a 1° lie error
Dynamic lie test for the Titleist Vokey 200 Series — Raw Standard
Test only if the head is safe to bend and dynamic evidence points upright.
Record strike and start direction before changing anything.
Use the same setup and ball position so the comparison is meaningful.
Should the Titleist Vokey 200 Series — Raw be more upright or flatter?
Test more upright when…
- Toe is consistently down at impact
- Centred shots start right despite stable delivery
Test flatter when…
- Heel is consistently down at impact
- Centred shots start left despite stable delivery
Do not change lie just because…
- Strike pattern is inconsistent
- Playing length or face/path is the real issue
Playing length reference
| Club / head | Length |
|---|---|
| 52 | 35.5 in |
| 54 | 35.25 in |
| 56 | 35.25 in |
| 58 | 35 in |
| 60 | 35 in |
Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one lie correction across the whole family.
Dynamic lie changes with delivery, shaft deflection, playing length and setup. For SureFit metals, use the Titleist chart for the exact category and handedness. For irons, wedges and putters, use a qualified fitter or putter technician before bending. Titleist SureFit guide.