Titleist Tour Model Irons (1979 generation) Iron Loft Chart

The Titleist Tour Model Irons (1979 generation) iron set is a traditional lofted iron set built around a 38° 7 iron and a 50° pitching wedge. Factory lofts span 20° to 50° across 9 clubs, with gaps ranging from 3° to 4° through the set.

Titleist Iron Loft Guide
38°7-Iron Loft
20°–50°Factory Loft Range
Median Loft Gap
9Loft Options

Tour Model Irons (1979 generation) Iron Loft Chart

Club Loft Gap
2-iron 20°
3-iron 23°
4-iron 26°
5-iron 30°
6-iron 34°
7-iron 38°
8-iron 42°
9-iron 46°
PW 50°
7-iron: 38°.
Range: 20°–50° (30° total span).
Gapping: Loft gaps range from 3° to 4°, with a 4° median step.

Tour Model Irons (1979 generation) Iron loft flight map

The bars place the whole set on one iron-loft scale. That makes the progression from long-iron distance lofts into scoring and wedge lofts easier to see without making small gaps look artificially huge.

2-iron
20°
Top end distance
3-iron
23°
Top end distance
4-iron
26°
Top end distance
5-iron
30°
Mid iron control
6-iron
34°
Mid iron control
7-iron
38°
Mid iron control
8-iron
42°
Scoring flight
9-iron
46°
Scoring flight
PW
50°
Wedge control
What stands out: The spacing varies from 3° to 4°. The biggest jump is between 4-iron and 5-iron, which is the part of the progression most likely to create a noticeably larger carry change.
38° 7-iron profileThis is a weak/traditional-lofted 7-iron by loft. That is the useful number to compare against another iron set—not just the club number stamped on the sole.
Gapping patternLoft spacing runs from 3° to 4° and varies through the set rather than following one fixed step. This matters when checking for distance overlap or a large carry jump.
After the 50° PWA sensible first check for the next wedge is roughly 54°–56°. That is not a fitting rule, but it flags whether a 50°, 52° or other wedge is likely to leave an unusually small or large loft gap.
Practical takeaway: When comparing Tour Model Irons (1979 generation) with another iron, compare the same numbered iron first. A 38° 7-iron can be materially different from another 7-iron that is several degrees stronger or weaker, even before head design is considered.

Tour Model Irons (1979 generation) vs other Titleist iron lofts

Model Reference Loft Difference
Tour Model Irons (1979 generation) 7-iron 38° This model
B-33 Irons 7-iron 37° 1° lower loft
DCI 762B Irons 7-iron 37° 1° lower loft
Accu-Flo Irons 7-iron 38° Same loft
Accu-Flo Plus Irons 7-iron 38° Same loft

How each Tour Model Irons (1979 generation) Iron loft changes the shot

Club Loft What that loft changes
2-iron 20° At 20° this is a true top-end distance iron. It will normally launch lowest, run out most and demand the most speed and strike quality in the set.
3-iron 23° At 23° this is a true top-end distance iron. It will normally launch lowest, run out most and demand the most speed and strike quality in the set. The gap from the previous club is 3°.
4-iron 26° At 26° this remains on the distance side of the set. The loft keeps flight stronger and flatter than the scoring clubs, so carry consistency matters more than the number stamped on the sole. The gap from the previous club is 3°. The next step changes to 4°, so this is a transition point worth checking with real carry numbers.
5-iron 30° At 30° this remains on the distance side of the set. The loft keeps flight stronger and flatter than the scoring clubs, so carry consistency matters more than the number stamped on the sole. The gap from the previous club is 4°.
6-iron 34° At 34° this is the set’s central control zone. It gives a good read on how aggressively the set is lofted and how much height versus distance the design is asking for. The gap from the previous club is 4°.
7-iron 38° At 38° this is the set’s central control zone. It gives a good read on how aggressively the set is lofted and how much height versus distance the design is asking for. A 38° 7-iron puts this set in the traditional loft category. The gap from the previous club is 4°.
8-iron 42° At 42° this is into scoring-iron territory. More loft here should increase launch, spin and descent angle, helping the ball stop faster as approach distances shorten. The gap from the previous club is 4°.
9-iron 46° At 46° this is into scoring-iron territory. More loft here should increase launch, spin and descent angle, helping the ball stop faster as approach distances shorten. The gap from the previous club is 4°.
PW 50° At 50° this sits at the wedge end of the stock set. The loft is increasingly about trajectory, stopping power and distance control rather than raw carry. The gap from the previous club is 4°.

The 38° 7-iron makes this a traditional-lofted set. The 50° pitching wedge is the key checkpoint for the transition into specialty wedges. The most useful test is still real carry spacing, because equal loft gaps do not always create equal yardage gaps.

Titleist Tour Model Irons (1979 generation) loft FAQs

What lofts does the Titleist Tour Model Irons (1979 generation) come in?

The listed factory lofts are 20°, 23°, 26°, 30°, 34°, 38°, 42°, 46° and 50°.

What is the loft range of the Tour Model Irons (1979 generation)?

It runs from 20° to 50°, a total span of 30°.

Are the Tour Model Irons (1979 generation) iron lofts strong or traditional?

The 7-iron is 38°, which puts the set in the traditional loft range.

What wedge loft fits after the Tour Model Irons (1979 generation) pitching wedge?

The pitching wedge is 50°. A practical starting point is usually about 4° to 6° more loft, then refine it using actual carry gaps.

Are the Tour Model Irons (1979 generation) loft gaps even?

The listed gaps vary from 3° to 4°, so the progression is not perfectly uniform.

Spec & fitting disclaimer: Loft can vary by year, region, handedness or custom setup. Adjustable hosels and bending can also change playing loft. Verify your exact club before adjusting or ordering replacements.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts