Titleist T250 Launch Spec Iron Loft Chart

The Titleist T250 Launch Spec iron set is a traditional lofted iron set built around a 35° 7 iron and a 47° pitching wedge. Factory lofts span 27° to 52° across 7 clubs, with gaps ranging from 4° to 5° through the set.

Titleist Iron Loft Guide
35°7-Iron Loft
27°–52°Factory Loft Range
Median Loft Gap
7Loft Options

T250 Launch Spec Iron Loft Chart

Club Loft Gap
5-iron 27°
6-iron 31°
7-iron 35°
8-iron 39°
9-iron 43°
PW 47°
W 52°
7-iron: 35°.
Range: 27°–52° (25° total span).
Gapping: Loft gaps range from 4° to 5°, with a 4° median step.

T250 Launch Spec Iron loft flight map

The bars place the whole set on one iron-loft scale. That makes the progression from long-iron distance lofts into scoring and wedge lofts easier to see without making small gaps look artificially huge.

5-iron
27°
Mid iron control
6-iron
31°
Mid iron control
7-iron
35°
Mid iron control
8-iron
39°
Scoring flight
9-iron
43°
Scoring flight
PW
47°
Wedge control
W
52°
Wedge control
What stands out: The spacing varies from 4° to 5°. The biggest jump is between PW and W, which is the part of the progression most likely to create a noticeably larger carry change.
35° 7-iron profileThis is a traditional-lofted 7-iron by loft. That is the useful number to compare against another iron set—not just the club number stamped on the sole.
Gapping patternLoft spacing runs from 4° to 5° and varies through the set rather than following one fixed step. This matters when checking for distance overlap or a large carry jump.
After the 47° PWA sensible first check for the next wedge is roughly 51°–53°. That is not a fitting rule, but it flags whether a 50°, 52° or other wedge is likely to leave an unusually small or large loft gap.
Practical takeaway: When comparing T250 Launch Spec with another iron, compare the same numbered iron first. A 35° 7-iron can be materially different from another 7-iron that is several degrees stronger or weaker, even before head design is considered.

T250 Launch Spec vs other Titleist iron lofts

Model Reference Loft Difference
T250 Launch Spec 7-iron 35° This model
AP2 (714) 7-iron 34° 1° lower loft
AP2 (716) 7-iron 34° 1° lower loft
620 CB 7-iron 35° Same loft
620 MB 7-iron 35° Same loft

How each T250 Launch Spec Iron loft changes the shot

Club Loft What that loft changes
5-iron 27° At 27° this remains on the distance side of the set. The loft keeps flight stronger and flatter than the scoring clubs, so carry consistency matters more than the number stamped on the sole.
6-iron 31° At 31° this is the set’s central control zone. It gives a good read on how aggressively the set is lofted and how much height versus distance the design is asking for. The gap from the previous club is 4°.
7-iron 35° At 35° this is the set’s central control zone. It gives a good read on how aggressively the set is lofted and how much height versus distance the design is asking for. A 35° 7-iron puts this set in the traditional modern loft category. The gap from the previous club is 4°.
8-iron 39° At 39° this is into scoring-iron territory. More loft here should increase launch, spin and descent angle, helping the ball stop faster as approach distances shorten. The gap from the previous club is 4°.
9-iron 43° At 43° this is into scoring-iron territory. More loft here should increase launch, spin and descent angle, helping the ball stop faster as approach distances shorten. The gap from the previous club is 4°.
PW 47° At 47° this sits at the wedge end of the stock set. The loft is increasingly about trajectory, stopping power and distance control rather than raw carry. The gap from the previous club is 4°. The next step changes to 5°, so this is a transition point worth checking with real carry numbers.
W 52° At 52° this sits at the wedge end of the stock set. The loft is increasingly about trajectory, stopping power and distance control rather than raw carry. The gap from the previous club is 5°.

The 35° 7-iron makes this a traditional modern-lofted set. The 47° pitching wedge is the key checkpoint for the transition into specialty wedges. The most useful test is still real carry spacing, because equal loft gaps do not always create equal yardage gaps.

Titleist T250 Launch Spec loft FAQs

What lofts does the Titleist T250 Launch Spec come in?

The listed factory lofts are 27°, 31°, 35°, 39°, 43°, 47° and 52°.

What is the loft range of the T250 Launch Spec?

It runs from 27° to 52°, a total span of 25°.

Are the T250 Launch Spec iron lofts strong or traditional?

The 7-iron is 35°, which puts the set in the traditional modern loft range.

What wedge loft fits after the T250 Launch Spec pitching wedge?

The pitching wedge is 47°. A practical starting point is usually about 4° to 6° more loft, then refine it using actual carry gaps.

Are the T250 Launch Spec loft gaps even?

The listed gaps vary from 4° to 5°, so the progression is not perfectly uniform.

Spec & fitting disclaimer: Loft can vary by year, region, handedness or custom setup. Adjustable hosels and bending can also change playing loft. Verify your exact club before adjusting or ordering replacements.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts