The Titleist PT Fairway Metal uses a 57° lie-angle reference. This guide focuses on this model’s actual specification, dynamic fit and the correct adjustment route.
Fairway Wood • Released 2001
PT Fairway Metal lie-angle fingerprint
What stands out about the PT Fairway Metal lie setup?
The available specification gives this model a 57° lie reference rather than a full progression.
For a fairway wood, lie fit is most useful for centre contact and address fit rather than as a cure for a large left/right miss.
Treat the head as fixed for lie unless Titleist documents an indexed adjustment system for the exact version.
Lie angle reference
| Standard lie | 57° |
|---|
Lie reference visual
PT Fairway Metal directional effect from a 1° lie error
Should the Titleist PT Fairway Metal be more upright or flatter?
A more upright fit may help when…
- A fitter confirms the fixed head fits too flat dynamically
- Another factory build produces better centre contact
A flatter fit may help when…
- A fitter confirms the fixed head fits too upright dynamically
- Another factory build produces better centre contact
Do not change lie just because…
- You plan to bend a fixed wood / hybrid head
- You have no repeatable strike baseline
Playing length reference
| Club / head | Length |
|---|---|
| 43 in | |
| 42.5 in | |
| 42 in | |
| 41.5 in |
Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one lie correction across the whole family.
Dynamic lie changes with delivery, shaft deflection, playing length and setup. For SureFit metals, use the Titleist chart for the exact category and handedness. For irons, wedges and putters, use a qualified fitter or putter technician before bending. Titleist SureFit guide.