Titleist CNCPT CP-04 Iron Loft Chart

The Titleist CNCPT CP-04 iron set is a strong lofted iron set built around a 30° 7 iron and a 44° pitching wedge. Factory lofts span 21° to 49° across 8 clubs, with gaps ranging from 3° to 5° through the set.

Titleist Iron Loft Guide
30°7-Iron Loft
21°–49°Factory Loft Range
Median Loft Gap
8Loft Options

CNCPT CP-04 Iron Loft Chart

Club Loft Gap
4-iron 21°
5-iron 24°
6-iron 27°
7-iron 30°
8-iron 34°
9-iron 39°
PW 44°
W 49°
7-iron: 30°.
Range: 21°–49° (28° total span).
Gapping: Loft gaps range from 3° to 5°, with a 4° median step.

CNCPT CP-04 Iron loft flight map

The bars place the whole set on one iron-loft scale. That makes the progression from long-iron distance lofts into scoring and wedge lofts easier to see without making small gaps look artificially huge.

4-iron
21°
Top end distance
5-iron
24°
Mid iron control
6-iron
27°
Mid iron control
7-iron
30°
Mid iron control
8-iron
34°
Scoring flight
9-iron
39°
Scoring flight
PW
44°
Wedge control
W
49°
Wedge control
What stands out: The spacing varies from 3° to 5°. The biggest jump is between 8-iron and 9-iron, which is the part of the progression most likely to create a noticeably larger carry change.
30° 7-iron profileThis is a very strong-lofted 7-iron by loft. That is the useful number to compare against another iron set—not just the club number stamped on the sole.
Gapping patternLoft spacing runs from 3° to 5° and widens noticeably toward the scoring clubs. This matters when checking for distance overlap or a large carry jump.
After the 44° PWA sensible first check for the next wedge is roughly 48°–50°. That is not a fitting rule, but it flags whether a 50°, 52° or other wedge is likely to leave an unusually small or large loft gap.
Practical takeaway: When comparing CNCPT CP-04 with another iron, compare the same numbered iron first. A 30° 7-iron can be materially different from another 7-iron that is several degrees stronger or weaker, even before head design is considered.

CNCPT CP-04 vs other Titleist iron lofts

Model Reference Loft Difference
CNCPT CP-04 7-iron 30° This model
CNCPT CP-03 7-iron 29° 1° lower loft
T300 (2019 generation) 7-iron 29° 1° lower loft
AP1 (718) 7-iron 30° Same loft
T250 7-iron 30.5° 0.5° higher loft

How each CNCPT CP-04 Iron loft changes the shot

Club Loft What that loft changes
4-iron 21° At 21° this remains on the distance side of the set. The loft keeps flight stronger and flatter than the scoring clubs, so carry consistency matters more than the number stamped on the sole.
5-iron 24° At 24° this remains on the distance side of the set. The loft keeps flight stronger and flatter than the scoring clubs, so carry consistency matters more than the number stamped on the sole. The gap from the previous club is 3°.
6-iron 27° At 27° this is the set’s central control zone. It gives a good read on how aggressively the set is lofted and how much height versus distance the design is asking for. The gap from the previous club is 3°.
7-iron 30° At 30° this is the set’s central control zone. It gives a good read on how aggressively the set is lofted and how much height versus distance the design is asking for. A 30° 7-iron puts this set in the very strong loft category. The gap from the previous club is 3°. The next step changes to 4°, so this is a transition point worth checking with real carry numbers.
8-iron 34° At 34° this is into scoring-iron territory. More loft here should increase launch, spin and descent angle, helping the ball stop faster as approach distances shorten. The gap from the previous club is 4°. The next step changes to 5°, so this is a transition point worth checking with real carry numbers.
9-iron 39° At 39° this is into scoring-iron territory. More loft here should increase launch, spin and descent angle, helping the ball stop faster as approach distances shorten. The gap from the previous club is 5°.
PW 44° At 44° this sits at the wedge end of the stock set. The loft is increasingly about trajectory, stopping power and distance control rather than raw carry. The gap from the previous club is 5°.
W 49° At 49° this sits at the wedge end of the stock set. The loft is increasingly about trajectory, stopping power and distance control rather than raw carry. The gap from the previous club is 5°.

The 30° 7-iron makes this a very strong-lofted set. The 44° pitching wedge is the key checkpoint for the transition into specialty wedges. The most useful test is still real carry spacing, because equal loft gaps do not always create equal yardage gaps.

Titleist CNCPT CP-04 loft FAQs

What lofts does the Titleist CNCPT CP-04 come in?

The listed factory lofts are 21°, 24°, 27°, 30°, 34°, 39°, 44° and 49°.

What is the loft range of the CNCPT CP-04?

It runs from 21° to 49°, a total span of 28°.

Are the CNCPT CP-04 iron lofts strong or traditional?

The 7-iron is 30°, which puts the set in the very strong loft range.

What wedge loft fits after the CNCPT CP-04 pitching wedge?

The pitching wedge is 44°. A practical starting point is usually about 4° to 6° more loft, then refine it using actual carry gaps.

Are the CNCPT CP-04 loft gaps even?

The listed gaps vary from 3° to 5°, so the progression is not perfectly uniform.

Spec & fitting disclaimer: Loft can vary by year, region, handedness or custom setup. Adjustable hosels and bending can also change playing loft. Verify your exact club before adjusting or ordering replacements.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts