Titleist B-33 Irons Loft Chart

The Titleist B-33 Irons is a traditional lofted iron set built around a 37° 7 iron and a 49° pitching wedge. Factory lofts span 22° to 49° across 8 clubs, with gaps ranging from 3° to 4° through the set.

Titleist Iron Loft Guide
37°7-Iron Loft
22°–49°Factory Loft Range
Median Loft Gap
8Loft Options

B-33 Irons Loft Chart

Club Loft Gap
3-iron 22°
4-iron 25°
5-iron 29°
6-iron 33°
7-iron 37°
8-iron 41°
9-iron 45°
PW 49°
7-iron: 37°.
Range: 22°–49° (27° total span).
Gapping: Loft gaps range from 3° to 4°, with a 4° median step.

B-33 Irons loft flight map

The bars place the whole set on one iron-loft scale. That makes the progression from long-iron distance lofts into scoring and wedge lofts easier to see without making small gaps look artificially huge.

3-iron
22°
Top end distance
4-iron
25°
Top end distance
5-iron
29°
Mid iron control
6-iron
33°
Mid iron control
7-iron
37°
Mid iron control
8-iron
41°
Scoring flight
9-iron
45°
Scoring flight
PW
49°
Wedge control
What stands out: The spacing varies from 3° to 4°. The biggest jump is between 4-iron and 5-iron, which is the part of the progression most likely to create a noticeably larger carry change.
37° 7-iron profileThis is a weak/traditional-lofted 7-iron by loft. That is the useful number to compare against another iron set—not just the club number stamped on the sole.
Gapping patternLoft spacing runs from 3° to 4° and varies through the set rather than following one fixed step. This matters when checking for distance overlap or a large carry jump.
After the 49° PWA sensible first check for the next wedge is roughly 53°–55°. That is not a fitting rule, but it flags whether a 50°, 52° or other wedge is likely to leave an unusually small or large loft gap.
Practical takeaway: When comparing B-33 Irons with another iron, compare the same numbered iron first. A 37° 7-iron can be materially different from another 7-iron that is several degrees stronger or weaker, even before head design is considered.

B-33 Irons vs other Titleist iron lofts

Model Reference Loft Difference
B-33 Irons 7-iron 37° This model
681 "T" Irons 7-iron 36° 1° lower loft
681 Forged Blade Irons 7-iron 36° 1° lower loft
DCI 762B Irons 7-iron 37° Same loft
DCI 962B Irons 7-iron 37° Same loft

How each B-33 Irons loft changes the shot

Club Loft What that loft changes
3-iron 22° At 22° this is a true top-end distance iron. It will normally launch lowest, run out most and demand the most speed and strike quality in the set.
4-iron 25° At 25° this remains on the distance side of the set. The loft keeps flight stronger and flatter than the scoring clubs, so carry consistency matters more than the number stamped on the sole. The gap from the previous club is 3°. The next step changes to 4°, so this is a transition point worth checking with real carry numbers.
5-iron 29° At 29° this remains on the distance side of the set. The loft keeps flight stronger and flatter than the scoring clubs, so carry consistency matters more than the number stamped on the sole. The gap from the previous club is 4°.
6-iron 33° At 33° this is the set’s central control zone. It gives a good read on how aggressively the set is lofted and how much height versus distance the design is asking for. The gap from the previous club is 4°.
7-iron 37° At 37° this is the set’s central control zone. It gives a good read on how aggressively the set is lofted and how much height versus distance the design is asking for. A 37° 7-iron puts this set in the traditional loft category. The gap from the previous club is 4°.
8-iron 41° At 41° this is into scoring-iron territory. More loft here should increase launch, spin and descent angle, helping the ball stop faster as approach distances shorten. The gap from the previous club is 4°.
9-iron 45° At 45° this is into scoring-iron territory. More loft here should increase launch, spin and descent angle, helping the ball stop faster as approach distances shorten. The gap from the previous club is 4°.
PW 49° At 49° this sits at the wedge end of the stock set. The loft is increasingly about trajectory, stopping power and distance control rather than raw carry. The gap from the previous club is 4°.

The 37° 7-iron makes this a traditional-lofted set. The 49° pitching wedge is the key checkpoint for the transition into specialty wedges. The most useful test is still real carry spacing, because equal loft gaps do not always create equal yardage gaps.

Titleist B-33 Irons loft FAQs

What lofts does the Titleist B-33 Irons come in?

The listed factory lofts are 22°, 25°, 29°, 33°, 37°, 41°, 45° and 49°.

What is the loft range of the B-33 Irons?

It runs from 22° to 49°, a total span of 27°.

Are the B-33 Irons iron lofts strong or traditional?

The 7-iron is 37°, which puts the set in the traditional loft range.

What wedge loft fits after the B-33 Irons pitching wedge?

The pitching wedge is 49°. A practical starting point is usually about 4° to 6° more loft, then refine it using actual carry gaps.

Are the B-33 Irons loft gaps even?

The listed gaps vary from 3° to 4°, so the progression is not perfectly uniform.

Spec & fitting disclaimer: Loft can vary by year, region, handedness or custom setup. Adjustable hosels and bending can also change playing loft. Verify your exact club before adjusting or ordering replacements.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts