The Titleist AP1 (716) iron set is a modern traditional iron set built around a 31° 7 iron and a 43° pitching wedge. Factory lofts span 19° to 52° across 10 clubs, with gaps ranging from 3° to 5° through the set.
AP1 (716) Iron Loft Chart
| Club | Loft | Gap |
|---|---|---|
| 3-iron | 19° | — |
| 4-iron | 22° | 3° |
| 5-iron | 25° | 3° |
| 6-iron | 28° | 3° |
| 7-iron | 31° | 3° |
| 8-iron | 35° | 4° |
| 9-iron | 39° | 4° |
| PW | 43° | 4° |
| W | 47° | 4° |
| W2 | 52° | 5° |
Range: 19°–52° (33° total span).
Gapping: Loft gaps range from 3° to 5°, with a 4° median step.
AP1 (716) Iron loft flight map
The bars place the whole set on one iron-loft scale. That makes the progression from long-iron distance lofts into scoring and wedge lofts easier to see without making small gaps look artificially huge.
AP1 (716) vs other Titleist iron lofts
| Model | Reference | Loft | Difference |
|---|---|---|---|
| AP1 (716) | 7-iron | 31° | This model |
| T250 | 7-iron | 30.5° | 0.5° lower loft |
| T250 Black Vapor | 7-iron | 30.5° | 0.5° lower loft |
| AP3 (718) | 7-iron | 31° | Same loft |
| CNCPT CP-01 | 7-iron | 31° | Same loft |
How each AP1 (716) Iron loft changes the shot
| Club | Loft | What that loft changes |
|---|---|---|
| 3-iron | 19° | At 19° this is a true top-end distance iron. It will normally launch lowest, run out most and demand the most speed and strike quality in the set. |
| 4-iron | 22° | At 22° this remains on the distance side of the set. The loft keeps flight stronger and flatter than the scoring clubs, so carry consistency matters more than the number stamped on the sole. The gap from the previous club is 3°. |
| 5-iron | 25° | At 25° this remains on the distance side of the set. The loft keeps flight stronger and flatter than the scoring clubs, so carry consistency matters more than the number stamped on the sole. The gap from the previous club is 3°. |
| 6-iron | 28° | At 28° this is the set’s central control zone. It gives a good read on how aggressively the set is lofted and how much height versus distance the design is asking for. The gap from the previous club is 3°. |
| 7-iron | 31° | At 31° this is the set’s central control zone. It gives a good read on how aggressively the set is lofted and how much height versus distance the design is asking for. A 31° 7-iron puts this set in the strong loft category. The gap from the previous club is 3°. The next step changes to 4°, so this is a transition point worth checking with real carry numbers. |
| 8-iron | 35° | At 35° this is into scoring-iron territory. More loft here should increase launch, spin and descent angle, helping the ball stop faster as approach distances shorten. The gap from the previous club is 4°. |
| 9-iron | 39° | At 39° this is into scoring-iron territory. More loft here should increase launch, spin and descent angle, helping the ball stop faster as approach distances shorten. The gap from the previous club is 4°. |
| PW | 43° | At 43° this sits at the wedge end of the stock set. The loft is increasingly about trajectory, stopping power and distance control rather than raw carry. The gap from the previous club is 4°. |
| W | 47° | At 47° this sits at the wedge end of the stock set. The loft is increasingly about trajectory, stopping power and distance control rather than raw carry. The gap from the previous club is 4°. The next step changes to 5°, so this is a transition point worth checking with real carry numbers. |
| W2 | 52° | At 52° this sits at the wedge end of the stock set. The loft is increasingly about trajectory, stopping power and distance control rather than raw carry. The gap from the previous club is 5°. |
The 31° 7-iron makes this a strong-lofted set. The 43° pitching wedge is the key checkpoint for the transition into specialty wedges. The most useful test is still real carry spacing, because equal loft gaps do not always create equal yardage gaps.
Titleist AP1 (716) loft FAQs
What lofts does the Titleist AP1 (716) come in?
The listed factory lofts are 19°, 22°, 25°, 28°, 31°, 35°, 39°, 43°, 47° and 52°.
What is the loft range of the AP1 (716)?
It runs from 19° to 52°, a total span of 33°.
Are the AP1 (716) iron lofts strong or traditional?
The 7-iron is 31°, which puts the set in the strong loft range.
What wedge loft fits after the AP1 (716) pitching wedge?
The pitching wedge is 43°. A practical starting point is usually about 4° to 6° more loft, then refine it using actual carry gaps.
Are the AP1 (716) loft gaps even?
The listed gaps vary from 3° to 5°, so the progression is not perfectly uniform.
Spec & fitting disclaimer: Loft can vary by year, region, handedness or custom setup. Adjustable hosels and bending can also change playing loft. Verify your exact club before adjusting or ordering replacements.