Titleist 983E Driver Specs (Loft | Length | Lie Angle)

The Titleist 983E Driver combines a 350 cc head, loft options of 8.5°, 9.5° and 10.5°, and a standard length of 45 in.

Titleist Golf Club Specifications

Driver • 2003 • RH/LH • Fixed hosel

Head size: 350 ccAvailable lofts: 8.5°, 9.5°, 10.5°Length: 45 in

Key specifications

DriverClub type
350 ccHead size
8.5°, 9.5°, 10.5°Available lofts
Fixed hoselLoft adjustability
57°Lie angle
45 inStandard length

Visual model specs

Built only from this model’s supplied specifications.

Loft options
3 available lofts spanning 8.5° to 10.5°.
8.5°
9.5°
10.5°
Model spec snapshot
Representative numeric specifications from this model.
350ccHead
57°Lie
45 inLength

How the Titleist 983E Driver compares

This compares the baseline specification with other Titleist drivers in this database. Driver loft comparisons use the lowest stated loft.

Head size
350 cc
18% below avg
11th percentile
Lowest stated loft
8.5 °
In line with avg
64th percentile
Lie angle
57 °
In line with avg
20th percentile
Standard length
45 in
In line with avg
34th percentile
Head size350 cc
Low 277 ccAverage 429 ccHigh 460 cc

About 18% smaller than the Titleist drivers database average. Around the 11th percentile for this field.

Lowest stated loft8.5 °
Low 6.4 °Average 8.4 °High 13 °

Very close to the Titleist drivers database average. Around the 64th percentile for this field.

Lie angle57 °
Low 54 °Average 57.9 °High 59 °

Very close to the Titleist drivers database average. Around the 20th percentile for this field.

Standard length45 in
Low 43.47 inAverage 45.07 inHigh 45.75 in

Very close to the Titleist drivers database average. Around the 34th percentile for this field.

This model Titleist average

Club information

Manufacturer Titleist
Model 983E
Club type Driver
Release year 2003

Head, loft and weighting

Head size 350 cc
Available lofts 8.5°; 9.5°; 10.5°
Loft adjustability Fixed hosel
Lie angle 57°

Shaft, grip and setup

Standard length 45 in
Stock shaft options Titleist Speeder by Fujikura
Stock grip Golf Pride/Titleist rubber grip
Hand availability RH/LH

Construction and forgiveness

Face / material / construction Titanium body with high-strength face; bore-through hosel
MOI / forgiveness information Moderate forgiveness; 983E prioritized workability/lower spin over maximum MOI

Disclaimer: Specifications can vary by model year, loft, shaft, flex, hand, set composition and market. Verify important specifications against official Titleist documentation and the official Titleist website.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts