Titleist 975 J-VS Driver Specs (Loft | Length | Lie Angle)

The Titleist 975 J-VS Driver combines loft options of 7.5°, 8.5°, 9.5°, 10.5° and 11.5°, a standard length of 45 in, and a listed swing weight of D4.

Titleist Golf Club Specifications

Driver • 2002 • RH/LH • Fixed hosel

Available lofts: 7.5°, 8.5°, 9.5°, 10.5°, 11.5°Length: 45 inSwing weight: D4

Key specifications

DriverClub type

7.5°, 8.5°, 9.5°, 10.5°, 11.5°Available lofts

Fixed hoselLoft adjustability

57°Lie angle

45 inStandard length

D4Swing weight

Visual model specs

Built only from this model’s supplied specifications.

Loft options

5 available lofts spanning 7.5° to 11.5°.

7.5°

8.5°

9.5°

10.5°

11.5°

Model spec snapshot

Representative numeric specifications from this model.

57°Lie

45 inLength

How the Titleist 975 J-VS Driver compares

This compares the baseline specification with other Titleist drivers in this database. Driver loft comparisons use the lowest stated loft.

Lowest stated loft

7.5 °

10% below avg

16th percentile

Lie angle

57 °

In line with avg

20th percentile

Standard length

45 in

In line with avg

34th percentile

Lowest stated loft7.5 °

Low 6.4 °Average 8.4 °High 13 °

About 10% lower loft than the Titleist drivers database average. Around the 16th percentile for this field.

Lie angle57 °

Low 54 °Average 57.9 °High 59 °

Very close to the Titleist drivers database average. Around the 20th percentile for this field.

Standard length45 in

Low 43.47 inAverage 45.07 inHigh 45.75 in

Very close to the Titleist drivers database average. Around the 34th percentile for this field.

This model Titleist average

Club information

Manufacturer	Titleist
Model	975 J-VS
Club type	Driver
Release year	2002

Head, loft and weighting

Available lofts	7.5°; 8.5°; 9.5°; 10.5°; 11.5°
Loft adjustability	Fixed hosel
Lie angle	57°
Swing weight	D4

Shaft, grip and setup

Standard length	45 in
Stock shaft options	Multiple Titleist custom graphite/steel shaft options
Stock grip	Golf Pride/Titleist rubber grip
Hand availability	RH/LH

Construction and forgiveness

Face / material / construction	Titanium body with thin beta-titanium face insert; bore-through hosel
MOI / forgiveness information	Moderate forgiveness; slightly easier to square than 975J; straight/draw bias reported

Disclaimer: Specifications can vary by model year, loft, shaft, flex, hand, set composition and market. Verify important specifications against official Titleist documentation and the official Titleist website.