Titleist 585.H Hybrid Lie Angle Chart

The Titleist 585.H Hybrid lie angles run from 58°–59°, moving from 17° head at 58° to 24° head at 59°.

Titleist Dynamic Lie Angle Guide

Hybrid • Released 2006

58°–59°Lie reference
19° head 58°Dynamic baseline
Fixed headAdjustment route
HighEvidence grade

585.H lie-angle fingerprint

58°–59°Lie reference
39.5–40.5 inPlaying length
Fixed headAdjustment route
HighEvidence grade

What stands out about the 585.H lie setup?

The 585.H moves from 58° at the 17° head to 59° at the 24° head — a total progression of .

Every meaningful lie step is 0.5°.

There is 1 repeated lie value where adjacent heads share the same angle.

For dynamic fitting, 19° head at 58° is the best central reference.

Hybrid / utility heads sit between irons and woods for lie sensitivity, but should not automatically be treated as bendable.

Treat the head as fixed for lie unless Titleist documents an indexed adjustment system for the exact version.

Factory lie angle chart

Club / head Lie Step Pattern
17° head 58° Starting lie
19° head 58° Same lie
21° head 58.5° +0.5° Typical step
24° head 59° +0.5° Typical step

Lie progression visual

The listed lie progression for this exact Titleist model.
17° head
58°
19° head
58°
21° head
58.5°
24° head
59°

585.H directional effect from a 1° lie error

Geometric face-plane direction estimate using this model’s listed lofts. This is not predicted curvature or yards offline.
17° loft
0.31°
19° loft
0.34°
21° loft
0.38°
24° loft
0.45°
Most lie-sensitive listed loft: 24° — about 0.45° of face-plane direction change from a 1° lie error.

Should the Titleist 585.H be more upright or flatter?

A more upright fit may help when…

  • A fitter confirms the fixed head fits too flat dynamically
  • Another factory build produces better centre contact

A flatter fit may help when…

  • A fitter confirms the fixed head fits too upright dynamically
  • Another factory build produces better centre contact

Do not change lie just because…

  • You plan to bend a fixed wood / hybrid head
  • You have no repeatable strike baseline

Playing length reference

Club / head Length
17° head 40.5 in
19° head 40.5 in
21° head 40 in
24° head 39.5 in

Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one lie correction across the whole family.

Verify the exact Titleist specification before changing lie angle

Dynamic lie changes with delivery, shaft deflection, playing length and setup. For SureFit metals, use the Titleist chart for the exact category and handedness. For irons, wedges and putters, use a qualified fitter or putter technician before bending. Titleist SureFit guide.