The TaylorMade TP Wedge with xFT wedge has 7 listed factory lofts. They run from 50° to 64°, a 14° total spread. This chart compares the stated wedge loft choices and the gaps between them, which is the useful starting point for building a consistent scoring-club setup.
TP Wedge with xFT Loft Chart
| Option | Loft | Gap |
|---|---|---|
| Loft option 1 | 50° | — |
| Loft option 2 | 52° | 2° |
| Loft option 3 | 54° | 2° |
| Loft option 4 | 56° | 2° |
| Loft option 5 | 58° | 2° |
| Loft option 6 | 60° | 2° |
| Loft option 7 | 64° | 4° |
Range: 50°–64° (14° total span).
Gapping: Adjacent loft gaps are mixed: 2°, 2°, 2°, 2°, 2°, 4°.
TP Wedge with xFT Relative Loft Map
These bars compare the listed lofts relative to each other inside this model. They are not measured performance outputs.
TP Wedge with xFT Launch, Spin & Trajectory Snapshot
These bars show the relative tendencies of the listed lofts within this model. They are not launch-monitor measurements; they simply visualize the practical difference between stronger and weaker lofts.
Low
Lower
Penetrating
Low
Lower
Penetrating
Low
Lower
Penetrating
Mid
Mid
Balanced
Mid
Mid
Balanced
High
Higher
Higher
High
Higher
Higher
How to use it: Use the lower lofts for a stronger, flatter starting point and the higher lofts for easier launch. Actual ball flight still depends heavily on delivered loft and strike.
Loft Spread
The listed lofts cover 14°, from 50° to 64°.
Choice Spacing
Adjacent loft gaps are mixed: 2°, 2°, 2°, 2°, 2°, 4°.
50° vs 64°
The 64° option has 14° more static loft than the 50° option.
TP Wedge with xFT vs Other TaylorMade Wedge Lofts
This comparison uses each model’s lowest listed loft so the numbers are on the same basis.
| Model | Lowest Loft | Difference |
|---|---|---|
| TP Wedge with xFT | 50° | This model |
| Z TP Wedge | 50° | Same lowest loft |
| ATV Wedge | 50° | Same lowest loft |
| RocketBallz Wedge | 50° | Same lowest loft |
| RocketBladez Wedge | 50° | Same lowest loft |
How Each TP Wedge with xFT Loft Changes the Starting Point
| Option | Loft | What it means |
|---|---|---|
| Option 1 | 50° | This is the strongest/lowest listed loft in the model and provides the lowest-loft starting point within the lineup. |
| Option 2 | 52° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 3 | 54° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 4 | 56° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 5 | 58° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 6 | 60° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 7 | 64° | This is the weakest/highest listed loft in the model and provides the highest-loft starting point within the lineup. |
TaylorMade TP Wedge with xFT Loft FAQs
What lofts does the TaylorMade TP Wedge with xFT come in?
The listed lofts are 50°, 52°, 54°, 56°, 58°, 60° and 64°.
What is the loft range of the TP Wedge with xFT?
It runs from 50° to 64°, a 14° total span.
What is the typical loft gap?
The median adjacent gap is 2°.
Which TP Wedge with xFT loft should launch highest?
The 64° option has the most static loft and should generally start higher, all else equal.
Can you adjust the loft?
Not as a normal loft-sleeve adjustment. Use the stated factory lofts as the baseline for this model.
Does more loft always mean a better result?
No. The best loft depends on the club type, player delivery, strike and the distance or trajectory window you are trying to hit.
Spec & fitting disclaimer: Loft availability and specifications can vary by year, region, handedness and configuration. Verify the exact club with TaylorMade’s official documentation or an authorized fitter before ordering or adjusting equipment.