The TaylorMade r7 quad Driver driver has 5 listed factory lofts. They run from 7.5° to 11.5°, a 4° total spread. The chart focuses on the stated head lofts themselves; actual launch and spin still depend on delivery, strike and the rest of the build.
r7 quad Driver Loft Chart
| Option | Loft | Gap |
|---|---|---|
| Loft option 1 | 7.5° | — |
| Loft option 2 | 8.5° | 1° |
| Loft option 3 | 9.5° | 1° |
| Loft option 4 | 10.5° | 1° |
| Loft option 5 | 11.5° | 1° |
Range: 7.5°–11.5° (4° total span).
Gapping: Every adjacent listed loft is spaced by 1°.
r7 quad Driver Relative Loft Map
These bars compare the listed lofts relative to each other inside this model. They are not measured performance outputs.
r7 quad Driver Launch, Spin & Trajectory Snapshot
These bars show the relative tendencies of the listed lofts within this model. They are not launch-monitor measurements; they simply visualize the practical difference between stronger and weaker lofts.
Low
Lower
Penetrating
Low
Lower
Penetrating
Mid
Mid
Balanced
High
Higher
Higher
High
Higher
Higher
How to use it: Use the lower lofts for a stronger, flatter starting point and the higher lofts for easier launch. Actual ball flight still depends heavily on delivered loft and strike.
Loft Spread
The listed lofts cover 4°, from 7.5° to 11.5°.
Choice Spacing
Every adjacent listed loft is spaced by 1°.
7.5° vs 11.5°
The 11.5° option has 4° more static loft than the 7.5° option.
r7 quad Driver vs Other TaylorMade Driver Lofts
This comparison uses each model’s lowest listed loft so the numbers are on the same basis.
| Model | Lowest Loft | Difference |
|---|---|---|
| r7 quad Driver | 7.5° | This model |
| R510 Driver | 7.5° | Same lowest loft |
| R510 TP Driver | 7.5° | Same lowest loft |
| r5 dual Type N Driver | 7.5° | Same lowest loft |
| r5 dual Driver | 7.5° | Same lowest loft |
How Each r7 quad Driver Loft Changes the Starting Point
| Option | Loft | What it means |
|---|---|---|
| Option 1 | 7.5° | This is the strongest/lowest listed loft in the model and provides the lowest-loft starting point within the lineup. |
| Option 2 | 8.5° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 3 | 9.5° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 4 | 10.5° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 5 | 11.5° | This is the weakest/highest listed loft in the model and provides the highest-loft starting point within the lineup. |
TaylorMade r7 quad Driver Loft FAQs
What lofts does the TaylorMade r7 quad Driver come in?
The listed lofts are 7.5°, 8.5°, 9.5°, 10.5° and 11.5°.
What is the loft range of the r7 quad Driver?
It runs from 7.5° to 11.5°, a 4° total span.
What is the typical loft gap?
The median adjacent gap is 1°.
Which r7 quad Driver loft should launch highest?
The 11.5° option has the most static loft and should generally start higher, all else equal.
Can you adjust the loft?
Not as a normal loft-sleeve adjustment. Use the stated factory lofts as the baseline for this model.
Does more loft always mean a better result?
No. The best loft depends on the club type, player delivery, strike and the distance or trajectory window you are trying to hit.
Spec & fitting disclaimer: Loft availability and specifications can vary by year, region, handedness and configuration. Verify the exact club with TaylorMade’s official documentation or an authorized fitter before ordering or adjusting equipment.