TaylorMade MG5 Tiger Woods Grind Wedge Lie Angle Chart

The TaylorMade MG5 Tiger Woods Grind Wedge uses a 64° lie-angle reference. With the extra loft of a wedge, even a small lie error can create a more noticeable start-direction change, especially on partial shots.

TaylorMade Dynamic Lie Angle Guide

Wedge • Released 2025

64°Lie reference
VariesPlaying length
Fitter adjustmentFitting route
Official / publishedData status

MG5 Tiger Woods Grind Wedge lie-angle fingerprint

64°Lie reference
VariesPlaying length
Fitter adjustmentFitting route
Official / publishedSpecification status

What stands out about the MG5 Tiger Woods Grind Wedge lie setup?

Wedge lie should be checked on both full and partial swings because posture and hand height often change with shot length.

Factory lie angle chart

Club / option Lie Step Pattern
Standard 64° Starting lie

Dynamic lie test for the TaylorMade MG5 Tiger Woods Grind Wedge

65°1° upright test

Test only if the head is safe to bend and dynamic evidence supports it.

64°Baseline

Record centred strike and start direction before changing anything.

63°1° flat test

Use the same setup and ball position for a useful comparison.

Right-handed reference: too upright tends to bias start left; too flat tends to bias start right. Reverse the directional wording for a left-handed player.

Should the TaylorMade MG5 Tiger Woods Grind Wedge be more upright or flatter?

Try more upright if…

  • Full and three-quarter shots consistently start right despite centred contact.
  • The toe sits or arrives noticeably low at impact.
  • You have to raise your hands to make the sole interact evenly with the turf.
  • A small upright test improves start direction on both full and partial shots.

Try flatter if…

  • Well-struck wedge shots consistently start left.
  • The heel digs first or the toe sits noticeably high through impact.
  • Short pitches feel heel-heavy through the turf.
  • A flatter test improves start direction without making the toe dig.

Do not blame lie angle if…

  • The miss only appears on one type of specialty shot.
  • Face angle or ball position changes from swing to swing.
  • You are comparing a full swing with an open-face bunker or flop setup.
  • Contact is inconsistent enough that there is no repeatable pattern.
Verify the exact TaylorMade specifications before relying on these numbers

Golf-club specifications can differ by model year, loft, region, custom build and adjustable-hosel setting. Before buying, fitting or changing a club, compare these figures with TaylorMade’s official specifications for your exact model. If a measurement is critical, have the club checked by a qualified fitter. Verify with TaylorMade.