The TaylorMade Iron Cleek iron set has 11 listed factory lofts. They run from 18° to 60°, a 42° total spread. This chart shows the model’s stated loft progression so you can see how aggressively or traditionally the set is gapped from the strongest to weakest loft.
Iron Cleek Loft Chart
| Option | Loft | Gap |
|---|---|---|
| Loft option 1 | 18° | — |
| Loft option 2 | 21° | 3° |
| Loft option 3 | 24° | 3° |
| Loft option 4 | 28° | 4° |
| Loft option 5 | 32° | 4° |
| Loft option 6 | 36° | 4° |
| Loft option 7 | 40° | 4° |
| Loft option 8 | 44° | 4° |
| Loft option 9 | 48° | 4° |
| Loft option 10 | 54° | 6° |
| Loft option 11 | 60° | 6° |
Range: 18°–60° (42° total span).
Gapping: Adjacent loft gaps are mixed: 3°, 3°, 4°, 4°, 4°, 4°, 4°, 4°, 6°, 6°.
Iron Cleek Relative Loft Map
These bars compare the listed lofts relative to each other inside this model. They are not measured performance outputs.
Iron Cleek Launch, Spin & Trajectory Snapshot
These bars show the relative tendencies of the listed lofts within this model. They are not launch-monitor measurements; they simply visualize the practical difference between stronger and weaker lofts.
Low
Lower
Penetrating
Low
Lower
Penetrating
Low
Lower
Penetrating
Low
Lower
Penetrating
Low
Lower
Penetrating
Mid
Mid
Balanced
Mid
Mid
Balanced
Mid
Mid
Balanced
High
Higher
Higher
High
Higher
Higher
High
Higher
Higher
How to use it: Use the lower lofts for a stronger, flatter starting point and the higher lofts for easier launch. Actual ball flight still depends heavily on delivered loft and strike.
Loft Spread
The listed lofts cover 42°, from 18° to 60°.
Choice Spacing
Adjacent loft gaps are mixed: 3°, 3°, 4°, 4°, 4°, 4°, 4°, 4°, 6°, 6°.
18° vs 60°
The 60° option has 42° more static loft than the 18° option.
Iron Cleek vs Other TaylorMade Iron Lofts
This comparison uses each model’s lowest listed loft so the numbers are on the same basis.
| Model | Lowest Loft | Difference |
|---|---|---|
| Iron Cleek | 18° | This model |
| ICW Mid Tour Irons | 18° | Same lowest loft |
| 300 Forged Irons | 18° | Same lowest loft |
| 300 Series Irons | 18° | Same lowest loft |
| 200 Irons | 18° | Same lowest loft |
How Each Iron Cleek Loft Changes the Starting Point
| Option | Loft | What it means |
|---|---|---|
| Option 1 | 18° | This is the strongest/lowest listed loft in the model and provides the lowest-loft starting point within the lineup. |
| Option 2 | 21° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 3 | 24° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 4 | 28° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 5 | 32° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 6 | 36° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 7 | 40° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 8 | 44° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 9 | 48° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 10 | 54° | This sits between the lowest and highest listed lofts and shows the progression through the model’s loft matrix. |
| Option 11 | 60° | This is the weakest/highest listed loft in the model and provides the highest-loft starting point within the lineup. |
TaylorMade Iron Cleek Loft FAQs
What lofts does the TaylorMade Iron Cleek come in?
The listed lofts are 18°, 21°, 24°, 28°, 32°, 36°, 40°, 44°, 48°, 54° and 60°.
What is the loft range of the Iron Cleek?
It runs from 18° to 60°, a 42° total span.
What is the typical loft gap?
The median adjacent gap is 4°.
Which Iron Cleek loft should launch highest?
The 60° option has the most static loft and should generally start higher, all else equal.
Can you adjust the loft?
Not as a normal loft-sleeve adjustment. Use the stated factory lofts as the baseline for this model.
Does more loft always mean a better result?
No. The best loft depends on the club type, player delivery, strike and the distance or trajectory window you are trying to hit.
Spec & fitting disclaimer: Loft availability and specifications can vary by year, region, handedness and configuration. Verify the exact club with TaylorMade’s official documentation or an authorized fitter before ordering or adjusting equipment.