The PING TiSI fairway wood lineup runs from 14° to 21° across 4 factory loft options. The 3-wood is 14° and the highest-lofted option is the 7-wood at 21°.
TiSI Lofts & Loft Chart
Factory loft map and model-specific gap analysis
TiSI Loft Chart
| Club | Loft | Loft Gap | Gap Read |
|---|---|---|---|
| 3W | 14° | — | — |
| 3W | 16° | 2° | Near model median |
| 5W | 18° | 2° | Near model median |
| 7W | 21° | 3° | Wider than model median |
What stands out about the TiSI loft?
Gap pattern: The loft steps vary from 2° to 3°, with a 2° median.
TiSI loft progression
Where do the TiSI loft gaps change?
The tightest gap is 2° between the 3-wood and 3-wood. The widest is 3° between the 5-wood and 7-wood. The median step is 2°.
TiSI vs other PING fairway wood lofts
This comparison uses the same benchmark club where possible and shows nearby lower, similar and higher PING lofts when available.
| PING Model | Benchmark Club | Loft | Difference |
|---|---|---|---|
| G Stretch | 3W | 13° | 1° lower loft |
| G10 | 3W | 14° | Same loft |
| G2 | 3W | 14° | Same loft |
| TiSI | 3W | 14° | This model |
| Anser | 3W | 14.5° | 0.5° higher loft |
| G20 | 3W | 15° | 1° higher loft |
Which TiSI club has each loft?
- 14° = 3-wood.
- 16° = 3-wood.
- 18° = 5-wood.
- 21° = 7-wood.
Individual TiSI loft answers
What loft is the PING TiSI 3-wood?
The TiSI 3-wood is 14°. It is the lowest-lofted option in this model.
What loft is the PING TiSI 3-wood?
The TiSI 3-wood is 16°. It has 2° more loft than the 3-wood.
What loft is the PING TiSI 5-wood?
The TiSI 5-wood is 18°. It has 2° more loft than the 3-wood.
What loft is the PING TiSI 7-wood?
The TiSI 7-wood is 21°. It has 3° more loft than the 5-wood.
TiSI Loft Intelligence
These derived specs show how the fairway-wood lineup is spaced and where its loft structure is tight or wide.
14° to 21°
between adjacent lofts
Highly varied
7-wood
5W to 7W structure: 3° separates the 5-wood and 7-wood.
Spacing variation: The average loft step is 2.3°. The largest step is 3° and the smallest is 2°, making the largest gap 1.5× the smallest.
Coverage: The family spans 7° from the 3-wood to the 7-wood.
How the TiSI lofts affect the shot
Loft is one of the biggest inputs into launch, trajectory, rollout and stopping power. The table below translates each TiSI loft into its likely loft-only shot tendency.
Low launch • Higher roll
Mid–high launch • Moderate–high stopping
Low → Mid–high launch tendency
Distance → control as loft increases
| Club | Loft | Launch Tendency | Flight Window | Roll Tendency | Stopping Tendency | Loft-Driven Role |
|---|---|---|---|---|---|---|
| 3W | 14° | Low | Penetrating | Higher | Lower | Maximum-distance fairway slot |
| 3W | 16° | Low–mid | Strong / penetrating | Moderate–high | Low–moderate | Distance-first fairway slot |
| 5W | 18° | Mid | Balanced | Moderate | Moderate | Versatile distance / approach slot |
| 7W | 21° | Mid–high | Higher / softer | Low–moderate | Moderate–high | Approach / long-par-3 friendly slot |
What the loft gaps mean for shot separation
- 3-wood → 3-wood: 2° — Tight loft step — these heads may sit fairly close in flight window.
- 3-wood → 5-wood: 2° — Tight loft step — these heads may sit fairly close in flight window.
- 5-wood → 7-wood: 3° — Moderate loft step — a conventional separation on paper.
Fairway-wood note: Lower-loft woods are biased toward speed, flatter flight and more rollout; higher-loft woods trade some distance for easier launch, steeper descent and more stopping power. A high-loft fairway can therefore behave very differently from a hybrid with the same number on the sole.
TiSI distance-to-control map
| Part of lineup | Reference club | Loft | What the loft favors |
|---|---|---|---|
| Distance end | 3-wood | 14° | Low launch, higher roll, stronger distance bias |
| Middle | 5-wood | 18° | Mid launch, more balanced carry/control role |
| Control end | 7-wood | 21° | Mid–high launch, moderate–high stopping tendency, stronger control bias |
Spec note: Loft can vary with model year, region, special configuration or custom fitting. Verify an exact club against PING documentation or measurement when a single degree matters.