The PING s259 wedge uses a 64°–64.5° lie-angle reference. Its listed progression runs from 46° at 64° to 62° at 64.5°, with lie steps ranging from 0.2° to 0.3° and 6 repeated lie values. The 62° is the most lie-sensitive listed loft in this model. Because wedges have more loft, even a small lie error can create a more noticeable face-direction change on partial and full shots. Fit it through PING Color Code and confirm the result dynamically.
Wedge • Released 2026
s259 lie-angle fingerprint
What stands out about the s259 lie setup?
The s259 progresses from 64° at 46° to 64.5° at 62°.
Lie steps vary from 0.2° to 0.3°.
There are 6 repeated lie values where consecutive lofts share the same angle.
The higher-loft wedges sit slightly more upright than the lower-loft options, so short-shot posture and sole contact should be checked at the actual loft being fit.
Factory lie angle chart
| Club / loft | Loft | Lie | Length |
|---|---|---|---|
| 46° | 46° | 64° | 35.5 in |
| 48° | 48° | 64° | 35.5 in |
| 50° | 50° | 64° | 35.5 in |
| 52° | 52° | 64° | 35.5 in |
| 54° | 54° | 64.3° | 35.25 in |
| 56° | 56° | 64.3° | 35.25 in |
| 58° | 58° | 64.5° | 35 in |
| 60° | 60° | 64.5° | 35 in |
| 62° | 62° | 64.5° | 35 in |
Lie progression visual
s259 directional effect from a 1° lie error
Dynamic lie test for the PING s259
Only test a different Color Code if dynamic delivery supports it.
Record centred strike and start direction first.
Keep setup and playing length consistent.
Should the PING s259 be more upright or flatter?
Test more upright when…
- Toe-down delivery repeats on centred strikes
- Start direction is consistently right for a right-handed player
Test flatter when…
- Heel-down delivery repeats on centred strikes
- Start direction is consistently left for a right-handed player
Do not change lie just because…
- You are fitting from height alone
- Strike pattern or setup is inconsistent
These lie angles are from PING’s published specifications for this model. PING notes that design specifications can vary due to manufacturing tolerances. View the official PING specifications.