The PING iBlade iron lineup runs from 20° to 46° across 8 factory loft options. The 7-iron is 34° and the highest-lofted option is the pitching wedge at 46°.
iBlade Lofts & Loft Chart
Factory loft map and model-specific gap analysis
iBlade Loft Chart
| Club | Loft | Loft Gap | Gap Read |
|---|---|---|---|
| 3i | 20° | — | — |
| 4i | 23.5° | 3.5° | Near model median |
| 5i | 27° | 3.5° | Near model median |
| 6i | 30.5° | 3.5° | Near model median |
| 7i | 34° | 3.5° | Near model median |
| 8i | 38° | 4° | Near model median |
| 9i | 42° | 4° | Near model median |
| PW | 46° | 4° | Near model median |
What stands out about the iBlade loft?
Gap pattern: The loft steps vary from 3.5° to 4°, with a 3.5° median.
iBlade loft progression
Where do the iBlade loft gaps change?
The tightest gap is 3.5° between the 3-iron and 4-iron. The widest is 4° between the 7-iron and 8-iron. The median step is 3.5°.
iBlade vs other PING iron lofts
This comparison uses the same benchmark club where possible and shows nearby lower, similar and higher PING lofts when available.
| PING Model | Benchmark Club | Loft | Difference |
|---|---|---|---|
| Anser | 7i | 33° | 1° lower loft |
| Blueprint | 7i | 34° | Same loft |
| Blueprint S | 7i | 34° | Same loft |
| iBlade | 7i | 34° | This model |
| S56 | 7i | 34.2° | 0.2° higher loft |
| ISI | 7i | 34.5° | 0.5° higher loft |
Which iBlade club has each loft?
- 20° = 3-iron.
- 23.5° = 4-iron.
- 27° = 5-iron.
- 30.5° = 6-iron.
- 34° = 7-iron.
- 38° = 8-iron.
- 42° = 9-iron.
- 46° = pitching wedge.
Individual iBlade loft answers
What loft is the PING iBlade 3-iron?
The iBlade 3-iron is 20°. It is the lowest-lofted option in this model.
What loft is the PING iBlade 4-iron?
The iBlade 4-iron is 23.5°. It has 3.5° more loft than the 3-iron.
What loft is the PING iBlade 5-iron?
The iBlade 5-iron is 27°. It has 3.5° more loft than the 4-iron.
What loft is the PING iBlade 6-iron?
The iBlade 6-iron is 30.5°. It has 3.5° more loft than the 5-iron.
What loft is the PING iBlade 7-iron?
The iBlade 7-iron is 34°. It has 3.5° more loft than the 6-iron.
What loft is the PING iBlade 8-iron?
The iBlade 8-iron is 38°. It has 4° more loft than the 7-iron.
What loft is the PING iBlade 9-iron?
The iBlade 9-iron is 42°. It has 4° more loft than the 8-iron.
What loft is the PING iBlade pitching wedge?
The iBlade pitching wedge is 46°. It has 4° more loft than the 9-iron.
iBlade Loft Intelligence
These derived specs show how the numbered irons are structured beyond the raw loft chart.
34° loft
vs ~35° traditional 7i
3.7° average
Consistent
Iron-only spacing: The tightest numbered-iron gap is 3.5° from 3i to 4i; the widest is 4° from 7i to 8i.
Loft Consistency Score: 83.9/100. This derived score measures variation in numbered-iron loft gaps; 100 means perfectly even spacing.
How the iBlade lofts affect the shot
Loft is one of the biggest inputs into launch, trajectory, rollout and stopping power. The table below translates each iBlade loft into its likely loft-only shot tendency.
Low launch • Higher roll
Very high launch • Very high stopping
Low → Very high launch tendency
Distance → control as loft increases
| Club | Loft | Launch Tendency | Flight Window | Roll Tendency | Stopping Tendency | Loft-Driven Role |
|---|---|---|---|---|---|---|
| 3i | 20° | Low | Penetrating | Higher | Low | Long-iron distance slot |
| 4i | 23.5° | Low–mid | Strong | Moderate–high | Low–moderate | Long-iron slot |
| 5i | 27° | Mid–low | Strong / flat | Moderate | Moderate | Distance-biased mid/long iron |
| 6i | 30.5° | Mid | Balanced | Moderate | Moderate–high | Mid-iron scoring transition |
| 7i | 34° | Mid–high | Higher | Low–moderate | High | Control-oriented mid/short iron |
| 8i | 38° | High | High / soft | Lower | High | Short-iron approach slot |
| 9i | 42° | High | High / steep | Low | Very high | Scoring-iron / pitching slot |
| PW | 46° | Very high | Very high / steep | Very low | Very high | Gap-control / scoring slot |
What the loft gaps mean for shot separation
- 3-iron → 4-iron: 3.5° — Normal-to-moderate loft step — usually a balanced transition.
- 4-iron → 5-iron: 3.5° — Normal-to-moderate loft step — usually a balanced transition.
- 5-iron → 6-iron: 3.5° — Normal-to-moderate loft step — usually a balanced transition.
- 6-iron → 7-iron: 3.5° — Normal-to-moderate loft step — usually a balanced transition.
- 7-iron → 8-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
- 8-iron → 9-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
- 9-iron → pitching wedge: 4° — Normal-to-moderate loft step — usually a balanced transition.
Iron note: Stronger lofts generally lower the launch/flight window and increase distance potential, while weaker lofts generally raise flight and stopping power. Modern iron head design can counteract some of that, so this is a loft-only tendency rather than a measured launch result.
Where the set changes from distance to control
By loft alone, the distance-biased part of the numbered set extends through roughly the 5-iron at 27°. By the 7-iron at 34°, the loft profile is clearly moving toward higher launch, steeper descent and stronger green-holding tendency.
iBlade distance-to-control map
| Part of lineup | Reference club | Loft | What the loft favors |
|---|---|---|---|
| Distance end | 3-iron | 20° | Low launch, higher roll, stronger distance bias |
| Middle | 7-iron | 34° | Mid–high launch, more balanced carry/control role |
| Control end | pitching wedge | 46° | Very high launch, very high stopping tendency, stronger control bias |
Spec note: Loft can vary with model year, region, special configuration or custom fitting. Verify an exact club against PING documentation or measurement when a single degree matters.