The PING i530 iron lineup runs from 18° to 50° across 9 factory loft options. The 7-iron is 30.5° and the highest-lofted option is the utility wedge at 50°.
i530 Lofts & Loft Chart
Factory loft map and model-specific gap analysis
i530 Loft Chart
| Club | Loft | Loft Gap | Gap Read |
|---|---|---|---|
| 3i | 18° | — | — |
| 4i | 21° | 3° | Tighter than model median |
| 5i | 24° | 3° | Tighter than model median |
| 6i | 27° | 3° | Tighter than model median |
| 7i | 30.5° | 3.5° | Near model median |
| 8i | 35° | 4.5° | Near model median |
| 9i | 40° | 5° | Wider than model median |
| PW | 45° | 5° | Wider than model median |
| UW | 50° | 5° | Wider than model median |
What stands out about the i530 loft?
Gap pattern: The loft steps vary from 3° to 5°, with a 4° median.
i530 loft progression
Where do the i530 loft gaps change?
The tightest gap is 3° between the 3-iron and 4-iron. The widest is 5° between the 8-iron and 9-iron. The median step is 4°.
i530 vs other PING iron lofts
This comparison uses the same benchmark club where possible and shows nearby lower, similar and higher PING lofts when available.
| PING Model | Benchmark Club | Loft | Difference |
|---|---|---|---|
| G Le | 7i | 29.5° | 1° lower loft |
| G | 7i | 30° | 0.5° lower loft |
| G30 | 7i | 30.5° | Same loft |
| GMax | 7i | 30.5° | Same loft |
| i530 | 7i | 30.5° | This model |
| Anser 2012 | 7i | 32° | 1.5° higher loft |
Which i530 club has each loft?
- 18° = 3-iron.
- 21° = 4-iron.
- 24° = 5-iron.
- 27° = 6-iron.
- 30.5° = 7-iron.
- 35° = 8-iron.
- 40° = 9-iron.
- 45° = pitching wedge.
- 50° = utility wedge.
Individual i530 loft answers
What loft is the PING i530 3-iron?
The i530 3-iron is 18°. It is the lowest-lofted option in this model.
What loft is the PING i530 4-iron?
The i530 4-iron is 21°. It has 3° more loft than the 3-iron.
What loft is the PING i530 5-iron?
The i530 5-iron is 24°. It has 3° more loft than the 4-iron.
What loft is the PING i530 6-iron?
The i530 6-iron is 27°. It has 3° more loft than the 5-iron.
What loft is the PING i530 7-iron?
The i530 7-iron is 30.5°. It has 3.5° more loft than the 6-iron.
What loft is the PING i530 8-iron?
The i530 8-iron is 35°. It has 4.5° more loft than the 7-iron.
What loft is the PING i530 9-iron?
The i530 9-iron is 40°. It has 5° more loft than the 8-iron.
What loft is the PING i530 pitching wedge?
The i530 pitching wedge is 45°. It has 5° more loft than the 9-iron.
What loft is the PING i530 utility wedge?
The i530 utility wedge is 50°. It has 5° more loft than the pitching wedge.
i530 Loft Intelligence
These derived specs show how the numbered irons are structured beyond the raw loft chart.
30.5° loft
vs ~35° traditional 7i
3.7° average
Highly varied
Iron-only spacing: The tightest numbered-iron gap is 3° from 3i to 4i; the widest is 5° from 8i to 9i.
Loft Consistency Score: 45.5/100. This derived score measures variation in numbered-iron loft gaps; 100 means perfectly even spacing.
How the i530 lofts affect the shot
Loft is one of the biggest inputs into launch, trajectory, rollout and stopping power. The table below translates each i530 loft into its likely loft-only shot tendency.
Low launch • Higher roll
Very high launch • Very high stopping
Low → Very high launch tendency
Distance → control as loft increases
| Club | Loft | Launch Tendency | Flight Window | Roll Tendency | Stopping Tendency | Loft-Driven Role |
|---|---|---|---|---|---|---|
| 3i | 18° | Low | Penetrating | Higher | Low | Long-iron distance slot |
| 4i | 21° | Low–mid | Strong | Moderate–high | Low–moderate | Long-iron slot |
| 5i | 24° | Low–mid | Strong | Moderate–high | Low–moderate | Long-iron slot |
| 6i | 27° | Mid–low | Strong / flat | Moderate | Moderate | Distance-biased mid/long iron |
| 7i | 30.5° | Mid | Balanced | Moderate | Moderate–high | Mid-iron scoring transition |
| 8i | 35° | Mid–high | Higher | Low–moderate | High | Control-oriented mid/short iron |
| 9i | 40° | High | High / soft | Lower | High | Short-iron approach slot |
| PW | 45° | High | High / steep | Low | Very high | Scoring-iron / pitching slot |
| UW | 50° | Very high | Very high / steep | Very low | Very high | Gap-control / scoring slot |
What the loft gaps mean for shot separation
- 3-iron → 4-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
- 4-iron → 5-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
- 5-iron → 6-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
- 6-iron → 7-iron: 3.5° — Normal-to-moderate loft step — usually a balanced transition.
- 7-iron → 8-iron: 4.5° — Wider loft step — worth checking carry distance for a larger jump.
- 8-iron → 9-iron: 5° — Wider loft step — worth checking carry distance for a larger jump.
- 9-iron → pitching wedge: 5° — Wider loft step — worth checking carry distance for a larger jump.
- pitching wedge → utility wedge: 5° — Wider loft step — worth checking carry distance for a larger jump.
Iron note: Stronger lofts generally lower the launch/flight window and increase distance potential, while weaker lofts generally raise flight and stopping power. Modern iron head design can counteract some of that, so this is a loft-only tendency rather than a measured launch result.
Where the set changes from distance to control
By loft alone, the distance-biased part of the numbered set extends through roughly the 6-iron at 27°. By the 8-iron at 35°, the loft profile is clearly moving toward higher launch, steeper descent and stronger green-holding tendency.
i530 distance-to-control map
| Part of lineup | Reference club | Loft | What the loft favors |
|---|---|---|---|
| Distance end | 3-iron | 18° | Low launch, higher roll, stronger distance bias |
| Middle | 7-iron | 30.5° | Mid launch, more balanced carry/control role |
| Control end | utility wedge | 50° | Very high launch, very high stopping tendency, stronger control bias |
Spec note: Loft can vary with model year, region, special configuration or custom fitting. Verify an exact club against PING documentation or measurement when a single degree matters.