PING i3 O-Size Loft Chart

The PING i3 O-Size iron lineup runs from 18° to 60° across 12 factory loft options. The 7-iron is 34° and the highest-lofted option is the lob wedge at 60°.

PING Iron Loft Guide

i3 O-Size Lofts & Loft Chart

Factory loft map and model-specific gap analysis

34°7-Iron Loft
18°–60°Factory Loft Range
Median Loft Gap
12Loft Options

i3 O-Size Loft Chart

Club Loft Loft Gap Gap Read
2i 18°
3i 21° Tighter than model median
4i 24° Tighter than model median
5i 27° Tighter than model median
6i 30.5° 3.5° Near model median
7i 34° 3.5° Near model median
8i 38° Near model median
9i 42° Near model median
PW 47° Wider than model median
UW 52° Wider than model median
SW 56° Near model median
LW 60° Near model median

What stands out about the i3 O-Size loft?

Benchmark loft: The 7-iron is 34°, matching the typical 34° PING 7-iron in this dataset.
Gap pattern: The loft steps vary from 3° to 5°, with a 4° median.

i3 O-Size loft progression

2i 18° → 3i 21° → 4i 24° → 5i 27° → 6i 30.5° → 7i 34° → 8i 38° → 9i 42° → PW 47° → UW 52° → SW 56° → LW 60°

Where do the i3 O-Size loft gaps change?

The tightest gap is between the 2-iron and 3-iron. The widest is between the 9-iron and pitching wedge. The median step is 4°.

i3 O-Size vs other PING iron lofts

This comparison uses the same benchmark club where possible and shows nearby lower, similar and higher PING lofts when available.

PING Model Benchmark Club Loft Difference
Anser 7i 33° 1° lower loft
Blueprint 7i 34° Same loft
Blueprint S 7i 34° Same loft
i3 O-Size 7i 34° This model
S56 7i 34.2° 0.2° higher loft
ISI 7i 34.5° 0.5° higher loft

Which i3 O-Size club has each loft?

  • 18° = 2-iron.
  • 21° = 3-iron.
  • 24° = 4-iron.
  • 27° = 5-iron.
  • 30.5° = 6-iron.
  • 34° = 7-iron.
  • 38° = 8-iron.
  • 42° = 9-iron.
  • 47° = pitching wedge.
  • 52° = utility wedge.
  • 56° = sand wedge.
  • 60° = lob wedge.

Individual i3 O-Size loft answers

What loft is the PING i3 O-Size 2-iron?

The i3 O-Size 2-iron is 18°. It is the lowest-lofted option in this model.

What loft is the PING i3 O-Size 3-iron?

The i3 O-Size 3-iron is 21°. It has 3° more loft than the 2-iron.

What loft is the PING i3 O-Size 4-iron?

The i3 O-Size 4-iron is 24°. It has 3° more loft than the 3-iron.

What loft is the PING i3 O-Size 5-iron?

The i3 O-Size 5-iron is 27°. It has 3° more loft than the 4-iron.

What loft is the PING i3 O-Size 6-iron?

The i3 O-Size 6-iron is 30.5°. It has 3.5° more loft than the 5-iron.

What loft is the PING i3 O-Size 7-iron?

The i3 O-Size 7-iron is 34°. It has 3.5° more loft than the 6-iron.

What loft is the PING i3 O-Size 8-iron?

The i3 O-Size 8-iron is 38°. It has 4° more loft than the 7-iron.

What loft is the PING i3 O-Size 9-iron?

The i3 O-Size 9-iron is 42°. It has 4° more loft than the 8-iron.

What loft is the PING i3 O-Size pitching wedge?

The i3 O-Size pitching wedge is 47°. It has 5° more loft than the 9-iron.

What loft is the PING i3 O-Size utility wedge?

The i3 O-Size utility wedge is 52°. It has 5° more loft than the pitching wedge.

What loft is the PING i3 O-Size sand wedge?

The i3 O-Size sand wedge is 56°. It has 4° more loft than the utility wedge.

What loft is the PING i3 O-Size lob wedge?

The i3 O-Size lob wedge is 60°. It has 4° more loft than the sand wedge.

i3 O-Size Loft Intelligence

These derived specs show how the numbered irons are structured beyond the raw loft chart.

7-ironBenchmark Iron
34° loft
1° strongerTraditional Loft Shift
vs ~35° traditional 7i
3.5° medianNumbered-Iron Gap
3.4° average
69.6/100Loft Consistency
Moderately varied
Strength fingerprint: The 7-iron is 34°. In static loft it is closest to a traditional 7-iron at about 35°.

Iron-only spacing: The tightest numbered-iron gap is 3° from 2i to 3i; the widest is 4° from 7i to 8i.

Loft Consistency Score: 69.6/100. This derived score measures variation in numbered-iron loft gaps; 100 means perfectly even spacing.

How the i3 O-Size lofts affect the shot

Loft is one of the biggest inputs into launch, trajectory, rollout and stopping power. The table below translates each i3 O-Size loft into its likely loft-only shot tendency.

18°Lowest-Loft Shot
Low launch • Higher roll
60°Highest-Loft Shot
Very high launch • Maximum stopping
42°Flight-Window Change
Low → Very high launch tendency
12 loftsShot Bias
Distance → control as loft increases
Model shot profile: Across the 42° loft span, the model moves from the 2-iron at 18° (low launch / higher roll tendency) to the lob wedge at 60° (very high launch / maximum stopping tendency). That is the core shot-shape trade-off created by the loft progression.
Club Loft Launch Tendency Flight Window Roll Tendency Stopping Tendency Loft-Driven Role
2i 18° Low Penetrating Higher Low Long-iron distance slot
3i 21° Low–mid Strong Moderate–high Low–moderate Long-iron slot
4i 24° Low–mid Strong Moderate–high Low–moderate Long-iron slot
5i 27° Mid–low Strong / flat Moderate Moderate Distance-biased mid/long iron
6i 30.5° Mid Balanced Moderate Moderate–high Mid-iron scoring transition
7i 34° Mid–high Higher Low–moderate High Control-oriented mid/short iron
8i 38° High High / soft Lower High Short-iron approach slot
9i 42° High High / steep Low Very high Scoring-iron / pitching slot
PW 47° Very high Very high / steep Very low Very high Gap-control / scoring slot
UW 52° Very high Maximum-height / steep Minimal Maximum Short-game / maximum-control slot
SW 56° Very high Maximum-height / steep Minimal Maximum Short-game / maximum-control slot
LW 60° Very high Maximum-height / steep Minimal Maximum Short-game / maximum-control slot

What the loft gaps mean for shot separation

  • 2-iron → 3-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
  • 3-iron → 4-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
  • 4-iron → 5-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
  • 5-iron → 6-iron: 3.5° — Normal-to-moderate loft step — usually a balanced transition.
  • 6-iron → 7-iron: 3.5° — Normal-to-moderate loft step — usually a balanced transition.
  • 7-iron → 8-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • 8-iron → 9-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • 9-iron → pitching wedge: 5° — Wider loft step — worth checking carry distance for a larger jump.
  • pitching wedge → utility wedge: 5° — Wider loft step — worth checking carry distance for a larger jump.
  • utility wedge → sand wedge: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • sand wedge → lob wedge: 4° — Normal-to-moderate loft step — usually a balanced transition.

Iron note: Stronger lofts generally lower the launch/flight window and increase distance potential, while weaker lofts generally raise flight and stopping power. Modern iron head design can counteract some of that, so this is a loft-only tendency rather than a measured launch result.

Where the set changes from distance to control

By loft alone, the distance-biased part of the numbered set extends through roughly the 5-iron at 27°. By the 7-iron at 34°, the loft profile is clearly moving toward higher launch, steeper descent and stronger green-holding tendency.

i3 O-Size distance-to-control map

Part of lineup Reference club Loft What the loft favors
Distance end 2-iron 18° Low launch, higher roll, stronger distance bias
Middle 8-iron 38° High launch, more balanced carry/control role
Control end lob wedge 60° Very high launch, maximum stopping tendency, stronger control bias

Spec note: Loft can vary with model year, region, special configuration or custom fitting. Verify an exact club against PING documentation or measurement when a single degree matters.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts