PING i25 Loft Chart

The PING i25 iron lineup runs from 21° to 58° across 11 factory loft options. The 7-iron is 33° and the highest-lofted option is the lob wedge at 58°.

PING Iron Loft Guide

i25 Lofts & Loft Chart

Factory loft map and model-specific gap analysis

33°7-Iron Loft
21°–58°Factory Loft Range
Median Loft Gap
11Loft Options

i25 Loft Chart

Club Loft Loft Gap Gap Read
3i 21°
4i 24° Tighter than model median
5i 27° Tighter than model median
6i 30° Tighter than model median
7i 33° Tighter than model median
8i 37° Near model median
9i 41° Near model median
PW 46° Wider than model median
UW 50° Near model median
SW 54° Near model median
LW 58° Near model median

What stands out about the i25 loft?

Benchmark loft: The 7-iron is 33°, which is 1° lower loft than the typical 34° PING 7-iron.
Gap pattern: The loft steps vary from 3° to 5°, with a 4° median.

i25 loft progression

3i 21° → 4i 24° → 5i 27° → 6i 30° → 7i 33° → 8i 37° → 9i 41° → PW 46° → UW 50° → SW 54° → LW 58°

Where do the i25 loft gaps change?

The tightest gap is between the 3-iron and 4-iron. The widest is between the 9-iron and pitching wedge. The median step is 4°.

i25 vs other PING iron lofts

This comparison uses the same benchmark club where possible and shows nearby lower, similar and higher PING lofts when available.

PING Model Benchmark Club Loft Difference
Anser 2012 7i 32° 1° lower loft
Anser 7i 33° Same loft
Faith 7i 33° Same loft
i25 7i 33° This model
Blueprint 7i 34° 1° higher loft
S56 7i 34.2° 1.2° higher loft

Which i25 club has each loft?

  • 21° = 3-iron.
  • 24° = 4-iron.
  • 27° = 5-iron.
  • 30° = 6-iron.
  • 33° = 7-iron.
  • 37° = 8-iron.
  • 41° = 9-iron.
  • 46° = pitching wedge.
  • 50° = utility wedge.
  • 54° = sand wedge.
  • 58° = lob wedge.

Individual i25 loft answers

What loft is the PING i25 3-iron?

The i25 3-iron is 21°. It is the lowest-lofted option in this model.

What loft is the PING i25 4-iron?

The i25 4-iron is 24°. It has 3° more loft than the 3-iron.

What loft is the PING i25 5-iron?

The i25 5-iron is 27°. It has 3° more loft than the 4-iron.

What loft is the PING i25 6-iron?

The i25 6-iron is 30°. It has 3° more loft than the 5-iron.

What loft is the PING i25 7-iron?

The i25 7-iron is 33°. It has 3° more loft than the 6-iron.

What loft is the PING i25 8-iron?

The i25 8-iron is 37°. It has 4° more loft than the 7-iron.

What loft is the PING i25 9-iron?

The i25 9-iron is 41°. It has 4° more loft than the 8-iron.

What loft is the PING i25 pitching wedge?

The i25 pitching wedge is 46°. It has 5° more loft than the 9-iron.

What loft is the PING i25 utility wedge?

The i25 utility wedge is 50°. It has 4° more loft than the pitching wedge.

What loft is the PING i25 sand wedge?

The i25 sand wedge is 54°. It has 4° more loft than the utility wedge.

What loft is the PING i25 lob wedge?

The i25 lob wedge is 58°. It has 4° more loft than the sand wedge.

i25 Loft Intelligence

These derived specs show how the numbered irons are structured beyond the raw loft chart.

7-ironBenchmark Iron
33° loft
2° strongerTraditional Loft Shift
vs ~35° traditional 7i
3° medianNumbered-Iron Gap
3.3° average
64.6/100Loft Consistency
Moderately varied
Strength fingerprint: The 7-iron is 33°. In static loft it is closest to a traditional 6-iron at about 31°.

Iron-only spacing: The tightest numbered-iron gap is 3° from 3i to 4i; the widest is 4° from 7i to 8i.

Loft Consistency Score: 64.6/100. This derived score measures variation in numbered-iron loft gaps; 100 means perfectly even spacing.

How the i25 lofts affect the shot

Loft is one of the biggest inputs into launch, trajectory, rollout and stopping power. The table below translates each i25 loft into its likely loft-only shot tendency.

21°Lowest-Loft Shot
Low–mid launch • Moderate–high roll
58°Highest-Loft Shot
Very high launch • Maximum stopping
37°Flight-Window Change
Low–mid → Very high launch tendency
11 loftsShot Bias
Distance → control as loft increases
Model shot profile: Across the 37° loft span, the model moves from the 3-iron at 21° (low–mid launch / moderate–high roll tendency) to the lob wedge at 58° (very high launch / maximum stopping tendency). That is the core shot-shape trade-off created by the loft progression.
Club Loft Launch Tendency Flight Window Roll Tendency Stopping Tendency Loft-Driven Role
3i 21° Low–mid Strong Moderate–high Low–moderate Long-iron slot
4i 24° Low–mid Strong Moderate–high Low–moderate Long-iron slot
5i 27° Mid–low Strong / flat Moderate Moderate Distance-biased mid/long iron
6i 30° Mid Balanced Moderate Moderate–high Mid-iron scoring transition
7i 33° Mid–high Higher Low–moderate High Control-oriented mid/short iron
8i 37° High High / soft Lower High Short-iron approach slot
9i 41° High High / steep Low Very high Scoring-iron / pitching slot
PW 46° Very high Very high / steep Very low Very high Gap-control / scoring slot
UW 50° Very high Very high / steep Very low Very high Gap-control / scoring slot
SW 54° Very high Maximum-height / steep Minimal Maximum Short-game / maximum-control slot
LW 58° Very high Maximum-height / steep Minimal Maximum Short-game / maximum-control slot

What the loft gaps mean for shot separation

  • 3-iron → 4-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
  • 4-iron → 5-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
  • 5-iron → 6-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
  • 6-iron → 7-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
  • 7-iron → 8-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • 8-iron → 9-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • 9-iron → pitching wedge: 5° — Wider loft step — worth checking carry distance for a larger jump.
  • pitching wedge → utility wedge: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • utility wedge → sand wedge: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • sand wedge → lob wedge: 4° — Normal-to-moderate loft step — usually a balanced transition.

Iron note: Stronger lofts generally lower the launch/flight window and increase distance potential, while weaker lofts generally raise flight and stopping power. Modern iron head design can counteract some of that, so this is a loft-only tendency rather than a measured launch result.

Where the set changes from distance to control

By loft alone, the distance-biased part of the numbered set extends through roughly the 5-iron at 27°. By the 8-iron at 37°, the loft profile is clearly moving toward higher launch, steeper descent and stronger green-holding tendency.

i25 distance-to-control map

Part of lineup Reference club Loft What the loft favors
Distance end 3-iron 21° Low–mid launch, moderate–high roll, stronger distance bias
Middle 8-iron 37° High launch, more balanced carry/control role
Control end lob wedge 58° Very high launch, maximum stopping tendency, stronger control bias

Spec note: Loft can vary with model year, region, special configuration or custom fitting. Verify an exact club against PING documentation or measurement when a single degree matters.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts