The PING G10 fairway wood has a fixed hosel with no wrench adjustable loft or lie. Factory loft range from 14° to 24.5°. The captured lie range from 56° to 57.5°. Tune flight through strike, ball position, shaft fit and the correct factory head.
PING Fairway Wood Tuning Guide
G10
Fixed hosel • 2007
FixedHosel
14°–24.5°Factory loft
56°–57.5°Factory lie
Setup / fitMain tuning method
What can you adjust?
| Loft or lie by wrench | No. Do not apply a PING adjustable hosel chart to this head. |
|---|---|
| Ball position | Yes. Slightly forward generally increases launch; slightly back tends to flatten flight. |
| Shaft and playing length | Yes through normal club fitting. |
| Factory loft | Choose another head in the family where available. |
Check strike before changing the club
| High face | Often raises launch and lowers spin. |
|---|---|
| Low face | Often lowers launch and adds spin. Check strike before adding loft. |
| Heel | Can add fade or slice gear effect. |
| Toe | Can add draw or hook gear effect. |
If it launches too low
- Check low face contact first.
- Move ball position slightly forward and re-test.
- If static loft is still too low, choose a higher loft head rather than trying to rotate the hosel.
If it launches too high
- Check high face contact and ball position.
- If needed, choose a lower loft factory head.
Factory specs
| Loft specs | 3W 14°; 3W 15.5°; 4W 17°; 5W 18.5°; 7W 21.5°; 9W 24.5° |
|---|---|
| Lie specs | 3W 56°; 3W 56°; 4W 56°; 5W 56.5°; 7W 57°; 9W 57.5° |
Disclaimer: Specifications can vary by year, region and configuration. Confirm your exact club in official PING documentation before altering the head or shaft.