The Mizuno T24 is defined by Mizuno's Grain Flow Forged HD construction. The line uses Quad Cut + Grooves together with Hydroflow Micro Grooves + face milling lines to manage spin, launch and face control. Its 4°–12° bounce window is especially broad, covering everything from low-bounce tight-lie setups to higher-bounce options that resist digging in softer turf and sand. A key distinction is strong shot-shaping potential.
Golf wedge specifications
Mizuno · T24 · Combined model
Year: 2023Configurations: 17Lofts: 46°–60°Bounce: 4°–12°Grinds: 5
17Configurations
46°–60°Loft range
4°–12°Bounce range
5Grinds
Range overview
Model range
The Mizuno T24 wedge line combines 17 published configurations from 46° to 60°, with 5 grinds and bounce options from 4° to 12°. All loft, bounce and grind versions are grouped on this single page so the real differences are easy to compare without creating near-duplicate model pages.
Wedge-model benchmarks
How this line compares
Benchmarks focus on grind choice and bounce versatility across complete wedge model families.
Grind options
Above average
5
Bounce range
Above average
8°
At a glance
Wedge profile
Loft coverage46°–60°
Bounce coverage4°–12°
GrindsS, D, C, V, X
Hand availabilityRH/LH (finish dependent)
Head material1025E mild carbon steel
FinishesSoft White Satin, Denim Copper, Tour Raw
Overview
Model information
| Manufacturer | Mizuno |
|---|---|
| Model | T24 |
| Category | Golf Wedge |
| Release year | 2023 |
| Status | Legacy / widely traded |
| Published configurations | 17 |
| Grinds | S, D, C, V, X |
Visual comparison
Grind differences
Each card summarizes the published lofts, bounce options and player fit for that grind.
C Grind
56°–60°6°–10°RH/LH (finish dependent)Medium
Full nameC ProfileLofts56°, 58°, 60°Bounce6°, 8°, 10°Turf fitAll / mediumSwing fitBroad / neutralForgivenessMid-HighOpen-face fitVery Good
D Grind
54°–58°8°–12°RH/LH (finish dependent)Medium
Full nameD ProfileLofts54°, 56°, 58°Bounce8°, 10°, 12°Turf fitAll / mediumSwing fitBroad / neutralForgivenessMid-HighOpen-face fitVery Good
S Grind
46°–56°8°–12°RH/LH (finish dependent)Medium
Full nameS ProfileLofts46°, 48°, 50°, 52°, 54°, 56°Bounce8°, 10°, 12°Turf fitAll / mediumSwing fitBroad / neutralForgivenessMid-HighOpen-face fitVery Good
V Grind
56°–60°8°–12°RH/LH (finish dependent)Medium
Full nameV ProfileLofts56°, 58°, 60°Bounce8°, 10°, 12°Turf fitAll / mediumSwing fitBroad / neutralForgivenessMid-HighOpen-face fitVery Good
X Grind
58°–60°4°–6°RH/LH (finish dependent)Medium
Full nameX ProfileLofts58°, 60°Bounce4°, 6°Turf fitAll / mediumSwing fitBroad / neutralForgivenessMid-HighOpen-face fitVery Good
Every same-model version
All configurations
| Version | Loft | Bounce | Grind | Hand | Length | SW | Shape |
|---|---|---|---|---|---|---|---|
| 46° / 8° S | 46° | 8° | S | RH/LH (finish dependent) | 35.5 in | — | Medium |
| 48° / 10° S | 48° | 10° | S | RH/LH (finish dependent) | 35.5 in | — | Medium |
| 50° / 8° S | 50° | 8° | S | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 52° / 10° S | 52° | 10° | S | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 54° / 8° D | 54° | 8° | D | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 54° / 10° S | 54° | 10° | S | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 56° / 6° C | 56° | 6° | C | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 56° / 8° V | 56° | 8° | V | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 56° / 10° D | 56° | 10° | D | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 56° / 12° S | 56° | 12° | S | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 58° / 4° X | 58° | 4° | X | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 58° / 8° C | 58° | 8° | C | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 58° / 10° V | 58° | 10° | V | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 58° / 12° D | 58° | 12° | D | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 60° / 6° X | 60° | 6° | X | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 60° / 10° C | 60° | 10° | C | RH/LH (finish dependent) | 35.25 in | — | Medium |
| 60° / 12° V | 60° | 12° | V | RH/LH (finish dependent) | 35.25 in | — | Medium |
Full specifications
Technical details
Head & face
Head material1025E mild carbon steel
ConstructionGrain Flow Forged HD
GroovesQuad Cut + Grooves
Face technologyHydroflow Micro Grooves + face milling lines
Finish optionsSoft White Satin, Denim Copper, Tour Raw
Build & dimensions
Loft options46°, 48°, 50°, 52°, 54°, 56°, 58°, 60°
Bounce options4°, 6°, 8°, 10°, 12°
Standard lengths35.5 in, 35.25 in
Lie angles63°
Hand availabilityRH/LH (finish dependent)
Shafts & grip
Stock shaftsCustom Mizuno shaft matrix
High-toe versionsNo
Full-face groovesNo
Player & turf fit
Turf conditionsAll / medium
Swing typesBroad / neutral
Bunker fitVery Good
Open-face fitVery Good