The Mizuno MP-T4 wedge lie angles run from 63°. The model’s lie progression spans 0° with a typical step of Single lie.
Wedge • Released 2013
MP-T4 lie-angle fingerprint
What stands out about the MP-T4 lie setup?
The available specification points to a lie reference of about 63°.
Because this is a wedge, dynamic lie matters heavily on partial shots as well as full swings: a small directional bias can be more noticeable when the target is close and launch is high.
This model’s lie changes should be made with a loft-and-lie machine, not by hand.
Lie angle reference
| Club / head | Lie |
|---|---|
| Standard lie | 63° |
Lie reference visual
MP-T4 directional effect from a 1° lie error
Dynamic lie test for the Mizuno MP-T4 Standard lie
Test only if the fitter confirms the head is safe to bend. Look for improved centre contact and a start line that moves back toward target.
Hit this first. Record strike, start direction and the vertical marker-line result before changing anything.
Use only when dynamic evidence points flatter. Re-test the same ball position and swing intent.
How to measure dynamic lie on the Mizuno MP-T4
Use a washable marker to draw a straight vertical line on the back of the ball facing the club.
Keep ball position and setup consistent. Ignore obvious toe / heel mishits because strike can distort the reading.
Top of the line leaning toward the toe generally points to a lie that is too upright; top leaning toward the heel generally points to a lie that is too flat.
Use launch direction, strike pattern and a fitter / launch monitor to confirm the pattern before bending.
Should the Mizuno MP-T4 be more upright or flatter?
Test more upright when…
- Full-swing testing shows consistent toe-down delivery
- Centred wedge shots repeatedly start right
- Heel / toe interaction is confirmed dynamically
Test flatter when…
- Partial shots repeatedly start left with centred contact
- Heel sits / enters turf first on repeatable delivery
- A flatter test improves short-game start line
Do not change lie just because…
- You are copying your iron lie without testing wedge shots
- The miss comes from face control or ball position
- You would need a large bend on an older head
Can the Mizuno MP-T4 lie angle be adjusted?
This is in a forged / forge-friendly family, which is generally more suitable for professional bending. The fitter should measure current lie, inspect the hosel, bend in small increments and re-measure. Historical heads need extra caution because age and previous bending history matter.
Why shaft length can change the lie fit
Playing length changes posture, hand height and delivery, so the same static lie can fit differently after a length change. Re-test dynamic lie after changing playing length rather than automatically adding or subtracting a fixed number of lie degrees.
Static lie is only the starting specification. Dynamic lie changes with delivery, shaft deflection, playing length and setup. Mizuno states that iron lie adjustment varies by model and material, while drivers and fairway woods are not bent for loft or lie. Before bending a club or rotating an indexed hosel, confirm the instructions for your exact model with Mizuno or a qualified fitter. Mizuno custom specifications.