The Cobra SS350 Offset is a fixed-hosel driver offered in 10.5° and 12° lofts. With no adjustable sleeve, loft is chosen at the head rather than changed after purchase. Fine-tuning comes from strike location, shaft fit, playing length and head weight; the bonded hosel should not be bent.
Cobra Driver Fitting & Adjustment Guide
SS350 Offset
2002
10.5°–12°Loft range
58°Lie range
VariesLength
FixedAdjustment system
Factory loft spacing
Factory spacing between clubs
10.5→12
1.5°
Average loft spacing: 1.5°. A smooth gap pattern matters more than simply making one club stronger or weaker.
Bending verdict
DO NOT BEND
Do not use an iron-style bending bar on this hosel. Use the documented Cobra sleeve when fitted or select a different factory loft when the head is fixed.
What to adjust instead
| Problem | Best first move | Why |
|---|---|---|
| Launch too low | More loft through the sleeve or a higher-loft head | Raises launch and normally adds spin |
| Launch too high | Less loft through the sleeve or a lower-loft head | Lowers launch and normally reduces spin |
| Slice | Fix heel strike first then test a more upright or draw-oriented setting if available | Strike correction often matters more than another setting |
| Hook | Fix toe strike first then move away from draw-oriented settings | Prevents adding bias to the wrong miss |
| Inconsistent contact | Test playing length and shaft fit | A shorter or better-matched build can improve centre contact |
Best fitting order
- Start at the neutral or factory setting.
- Mark strike location.
- Change only one variable.
- Compare launch, curvature and contact.
- Keep the change only when it improves the normal miss.
Disclaimer: Adapter labels and stock geometry vary by model and year. Confirm the exact Cobra adjustment chart before changing hardware.