The Cobra RADSpeed Hybrid uses FutureFit33 hosel adjustment across 17°, 19°, 21°, and 24° lofts. Use the sleeve to tune launch and start direction rather than physically bending the hybrid hosel.
Cobra Hybrid Fitting & Adjustment Guide
RADSpeed Hybrid
2021
17°–24°Loft range
58°–59.5°Lie range
VariesLength
FutureFit33Adjustment system
Factory loft spacing
Factory spacing between clubs
2H→3H
2°
3H→4H
2°
4H→5H
3°
Average loft spacing: 2.3°. A smooth gap pattern matters more than simply making one club stronger or weaker.
Bending verdict
DO NOT BEND
Do not use an iron-style bending bar on this hosel. Use the documented Cobra sleeve when fitted or select a different factory loft when the head is fixed.
What to adjust instead
| Problem | Best first move | Why |
|---|---|---|
| Launch too low | More loft through the sleeve or a higher-loft head | Raises launch and normally adds spin |
| Launch too high | Less loft through the sleeve or a lower-loft head | Lowers launch and normally reduces spin |
| Slice | Fix heel strike first then test a more upright or draw-oriented setting if available | Strike correction often matters more than another setting |
| Hook | Fix toe strike first then move away from draw-oriented settings | Prevents adding bias to the wrong miss |
| Inconsistent contact | Test playing length and shaft fit | A shorter or better-matched build can improve centre contact |
FutureFit33: use loft to tune launch first and lie to refine start direction. The system allows independent loft and lie changes rather than forcing both to move together.
Best fitting order
- Start at the neutral or factory setting.
- Mark strike location.
- Change only one variable.
- Compare launch, curvature and contact.
- Keep the change only when it improves the normal miss.
Disclaimer: Adapter labels and stock geometry vary by model and year. Confirm the exact Cobra adjustment chart before changing hardware.