The Cobra King Cobra II Oversize irons has 13 listed factory loft options. The listed lofts are 17°, 18.5°, 20°, 23°, 26°, 29°, 32°, 35°, 39°, 45.5°, 50°, 56° and 60°. The chart focuses on the stated head lofts themselves; actual launch and spin still depend on delivery, strike and the rest of the build.
King Cobra II Oversize Loft Chart
| Option | Loft | Gap |
|---|---|---|
| 1 | 17° | — |
| 2 | 18.5° | 1.5° |
| 3 | 20° | 1.5° |
| 4 | 23° | 3° |
| 5 | 26° | 3° |
| 6 | 29° | 3° |
| 7 | 32° | 3° |
| 8 | 35° | 3° |
| 9 | 39° | 4° |
| PW | 45.5° | 6.5° |
| GW | 50° | 4.5° |
| SW | 56° | 6° |
| LW | 60° | 4° |
Range: 17°–60° (43° total span).
Gapping: The median gap between adjacent listed lofts is 3°.
King Cobra II Oversize Relative Loft Map
These bars compare the listed lofts relative to each other inside this model. They are not measured performance outputs.
King Cobra II Oversize Launch, Spin & Trajectory Snapshot
These bars show the relative tendencies of the listed lofts within this model. They are not launch-monitor measurements; they simply visualize the practical difference between stronger and weaker lofts.
Lower
Lower
Flatter
Lower
Lower
Flatter
Lower
Lower
Flatter
Lower
Lower
Flatter
Lower
Lower
Flatter
Lower
Lower
Flatter
Mid
Mid
Balanced
Mid
Mid
Balanced
Mid
Mid
Balanced
Higher
Higher
Higher
Higher
Higher
Higher
Higher
Higher
Higher
Higher
Higher
Higher
How to use it: Use the lower lofts for a stronger, flatter starting point and the higher lofts for easier launch. Actual ball flight still depends heavily on delivered loft and strike.
Loft Spread
The listed lofts cover 43°, from 17° to 60°.
Choice Spacing
The adjacent listed loft gaps run from 1.5° to 6.5°, with a median of 3°.
17° vs 60°
Moving from 17° to 60° adds 43° of static loft. The higher-loft option generally starts from an easier-launching, higher-spin baseline.
King Cobra II Oversize vs Other Cobra Irons Lofts
This comparison uses each model’s lowest listed loft so the numbers are on the same basis.
| Model | Lowest Loft | Difference |
|---|---|---|
| King Cobra II Oversize | 17° | This model |
| King Cobra Oversize | 17° | Same lowest loft |
| Gravity Back | 16° | 1° lower |
| King Cobra SS Forged | 18° | 1° higher |
| King F6 | 18° | 1° higher |
How Each King Cobra II Oversize Loft Changes the Starting Point
| Option | Loft | What it means |
|---|---|---|
| 1 | 17° | This is the strongest listed loft and the lowest-launching starting point within the model. |
| 2 | 18.5° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| 3 | 20° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| 4 | 23° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| 5 | 26° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| 6 | 29° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| 7 | 32° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| 8 | 35° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| 9 | 39° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| PW | 45.5° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| GW | 50° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| SW | 56° | This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point. |
| LW | 60° | This is the weakest listed loft and the easiest-launching starting point within the model. |
Cobra King Cobra II Oversize Loft FAQs
What lofts does the Cobra King Cobra II Oversize come in?
The listed lofts are 17°, 18.5°, 20°, 23°, 26°, 29°, 32°, 35°, 39°, 45.5°, 50°, 56° and 60°.
What is the loft range of the King Cobra II Oversize?
It runs from 17° to 60°, a 43° total span.
What is the typical loft gap?
The median adjacent loft gap is 3°.
Which King Cobra II Oversize loft should launch highest?
The 60° option is the highest listed loft and should provide the highest-launching starting point, all else equal.
Can you adjust the loft?
The King Cobra II Oversize has no user-adjustable loft sleeve. Loft is changed, where the head construction permits it, by a club fitter placing the head in a loft-and-lie bending machine and bending the hosel to the measured target. Do not bend it by hand. Strengthening loft also reduces effective bounce by roughly the same amount; weakening loft adds roughly the same amount of bounce. The safe bending range depends on the exact head material and condition, so the fitter should measure the club first.
Does more loft always mean a better result?
No. The best loft depends on the club type, player delivery, strike and the distance or trajectory window you are trying to hit.
Spec & fitting disclaimer: Loft availability and specifications can vary by year, region, handedness and configuration. Verify the exact club with Cobra’s official documentation or an authorized fitter before ordering or adjusting equipment.