The Cobra Darkspeed One Length Iron uses a 62.5° lie-angle reference. Treat lie as a fitting variable alongside playing length, posture, strike and delivered face angle.
Iron • Released 2024
Darkspeed One Length lie-angle overview
What stands out about the Darkspeed One Length lie setup?
Treat the listed lie as a reference point, then confirm it dynamically from strike pattern and start direction.
Lie angle reference chart
| Club / option | Lie angle |
|---|---|
| Standard | 62.5° |
Dynamic lie test for the Cobra Darkspeed One Length
Test this only with a qualified fitter and only if the head or hosel can be safely adjusted. Use centred strikes and start direction to judge whether a more upright lie actually helps.
Start here, establish centred contact and record start direction before making any physical lie-angle change.
Test this only with a qualified fitter and only if the head or hosel can be safely adjusted. Keep the change only if strike quality and start direction improve together.
Should the Cobra Darkspeed One Length be more upright or flatter?
Try a more upright fit if…
- This model uses essentially the same lie reference across the set (62.5°); centred strikes with several different irons all show the same persistent right-start/toe-down pattern.
- The problem repeats around the set rather than appearing only in one club, which is the key clue on a one-length / constant-lie design.
- Your one-length posture and hand height are repeatable, but the heads still arrive dynamically too flat.
- Use Standard at 62.5° as the reference test and only move more upright if the same correction also improves adjacent irons.
Try a flatter fit if…
- Across the shared 62.5° lie setup, multiple centred strikes start left and show heel-down delivery—not just one problem club.
- Your hands naturally return lower than the stock one-length geometry expects, making the set play dynamically upright.
- Verify the common playing length before changing lie, because one-length geometry makes the two variables tightly linked.
- A flatter test around Standard at 62.5° improves start line across more than one iron without moving impact away from centre.
Lie angle probably is not the main problem if…
- Only one iron misbehaves while the rest of the constant 62.5° lie setup performs normally—check that individual club’s build/spec first.
- Your miss changes by club because face/path or strike changes, not because the whole one-length set shares the wrong lie.
- You are altering posture between clubs, which defeats the purpose of diagnosing a constant-length/constant-lie set.
- A lie change fixes one end of the set but makes the other clubs worse; that points to delivery or individual build tolerances instead.
Why playing length changes the lie fit
Playing length is not listed in the supplied specification set. Because length changes posture and hand height, re-check dynamic lie if the club is built shorter or longer than standard.