The Cobra Comp Fairway Woods is a fixed-hosel fairway wood offered in 15°, 18°, and 21° lofts. With no adjustable sleeve, choose the factory loft that fits the required launch and distance gap. Further tuning comes from strike, shaft, playing length and head weight rather than bending the hosel.
Cobra Fairway Wood Fitting & Adjustment Guide
Comp Fairway Woods
2004
15°–21°Loft range
57°–59°Lie range
VariesLength
FixedAdjustment system
Factory loft spacing
Factory spacing between clubs
3W→5W
3°
5W→7W
3°
Average loft spacing: 3.0°. A smooth gap pattern matters more than simply making one club stronger or weaker.
Bending verdict
DO NOT BEND
Do not use an iron-style bending bar on this hosel. Use the documented Cobra sleeve when fitted or select a different factory loft when the head is fixed.
What to adjust instead
| Problem | Best first move | Why |
|---|---|---|
| Launch too low | More loft through the sleeve or a higher-loft head | Raises launch and normally adds spin |
| Launch too high | Less loft through the sleeve or a lower-loft head | Lowers launch and normally reduces spin |
| Slice | Fix heel strike first then test a more upright or draw-oriented setting if available | Strike correction often matters more than another setting |
| Hook | Fix toe strike first then move away from draw-oriented settings | Prevents adding bias to the wrong miss |
| Inconsistent contact | Test playing length and shaft fit | A shorter or better-matched build can improve centre contact |
Best fitting order
- Start at the neutral or factory setting.
- Mark strike location.
- Change only one variable.
- Compare launch, curvature and contact.
- Keep the change only when it improves the normal miss.
Disclaimer: Adapter labels and stock geometry vary by model and year. Confirm the exact Cobra adjustment chart before changing hardware.