Cobra Bio Cell Hybrid Loft Chart

The Cobra Bio Cell Hybrid hybrid has 3 listed factory loft options. The listed lofts are 16°, 19° and 22°. The chart focuses on the stated head lofts themselves; actual launch and spin still depend on delivery, strike and the rest of the build.

Cobra Hybrid Loft Guide
16°Lowest Listed Loft
16°–22°Listed Loft Range
Median Loft Gap
3Loft Options

Bio Cell Hybrid Loft Chart

Option Loft Gap
Option 1 16°
Option 2 19°
Option 3 22°
Lowest listed loft: 16°.
Range: 16°–22° (6° total span).
Gapping: The median gap between adjacent listed lofts is 3°.

Bio Cell Hybrid Relative Loft Map

These bars compare the listed lofts relative to each other inside this model. They are not measured performance outputs.

Option 1

16°Lowest loft

Option 2

19°Mid-range

Option 3

22°Highest loft

Bio Cell Hybrid Launch, Spin & Trajectory Snapshot

These bars show the relative tendencies of the listed lofts within this model. They are not launch-monitor measurements; they simply visualize the practical difference between stronger and weaker lofts.

Option 1 — 16°Lower loft

Lower

Lower

Flatter

Option 2 — 19°Middle loft

Mid

Mid

Balanced

Option 3 — 22°Higher loft

Higher

Higher

Higher

How to use it: Use the lower lofts for a stronger, flatter starting point and the higher lofts for easier launch. Actual ball flight still depends heavily on delivered loft and strike.

What stands out: The listed lofts span , from 16° to 22°. This gives the model a meaningful range of starting points for launch and distance fitting.

Loft Spread

The listed lofts cover , from 16° to 22°.

Choice Spacing

The adjacent listed loft gaps run from 3° to 3°, with a median of 3°.

16° vs 22°

Moving from 16° to 22° adds 6° of static loft. The higher-loft option generally starts from an easier-launching, higher-spin baseline.

Fitting note: The chart is based on the stated factory lofts. Actual playing loft and flight can vary with build, lie, shaft lean, setup and strike.

Bio Cell Hybrid vs Other Cobra Hybrid Lofts

This comparison uses each model’s lowest listed loft so the numbers are on the same basis.

Model Lowest Loft Difference
Bio Cell Hybrid 16° This model
AMP Cell Hybrid 16° Same lowest loft
AMP Cell-S Hybrid 16° Same lowest loft
Fly-Z Hybrid 16° Same lowest loft
Fly-Z S Hybrid 16° Same lowest loft

How Each Bio Cell Hybrid Loft Changes the Starting Point

Option Loft What it means
Option 1 16° This is the strongest listed loft and the lowest-launching starting point within the model.
Option 2 19° This sits between the strongest and weakest listed lofts for a more middle-of-the-range starting point.
Option 3 22° This is the weakest listed loft and the easiest-launching starting point within the model.

Cobra Bio Cell Hybrid Loft FAQs

What lofts does the Cobra Bio Cell Hybrid come in?

The listed lofts are 16°, 19° and 22°.

What is the loft range of the Bio Cell Hybrid?

It runs from 16° to 22°, a 6° total span.

What is the typical loft gap?

The median adjacent loft gap is .

Which Bio Cell Hybrid loft should launch highest?

The 22° option is the highest listed loft and should provide the highest-launching starting point, all else equal.

Can you adjust the loft?

Yes. The Bio Cell Hybrid uses Cobra’s MyFly8 adjustable hosel. Put the Cobra torque wrench in the hosel screw and turn counterclockwise until the shaft can be lifted/rotated. Turn the sleeve until the desired loft or trajectory label is visible in the hosel window, re-seat the shaft, then tighten clockwise until the wrench clicks once. MyFly8 gives 8 settings; the exact loft labels and Draw/Upright positions depend on this head, so use the labels engraved on its own sleeve. Do not bend the hosel to change loft.

Does more loft always mean a better result?

No. The best loft depends on the club type, player delivery, strike and the distance or trajectory window you are trying to hit.

Spec & fitting disclaimer: Loft availability and specifications can vary by year, region, handedness and configuration. Verify the exact club with Cobra’s official documentation or an authorized fitter before ordering or adjusting equipment.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts