The Club Car Carryall 6 Golf Cart (2003) stands out for above-average dry weight at 893 lb. (405 kg), while high vehicle rated capacity comes in at 1500 lb. (680 kg). It also has overall width of 49.3 in. (125 cm).
Specification profile
Golf Cart • 2003
Dry Weight: 893 lb. (405 kg)Vehicle Rated Capacity: 1500 lb. (680 kg)Overall Width: 49.3 in. (125 cm)Floorboard Height: 11.8 in. (30 cm)
893 lb. (405 kg)Dry Weight
1500 lb. (680 kg)Vehicle Rated Capacity
49.3 in. (125 cm)Overall Width
11.8 in. (30 cm)Floorboard Height
27 in. (69 cm)Load Bed Height
48 in. (122 cm)Overall Height
30 in. (76 cm)Seat Height
134 in. (340 cm)Overall Length
How it compares
Low, average or high?
Dry Weight
Above average
893 lb. (405 kg)
Low 557 lb (253 kg)Typical 770 lb (349 kg)High 1,042 lb (473 kg)
Dry Weight is above the typical figure.
Vehicle Rated Capacity
High
1500 lb. (680 kg)
Low 800 lb (363 kg)Typical 1,144 lb (519 kg)High 1,600 lb (726 kg)
Vehicle Rated Capacity is well above the typical figure.
Turning Radius Per SAE J 695
Above average
144 in. (366 cm)
Low 68 in (173 cm)Typical 120 in (306 cm)High 144 in (366 cm)
Turning Radius Per SAE J 695 is above the typical figure.
Overall Length
Above average
134 in. (340 cm)
Low 91.2 in (232 cm)Typical 114 in (289 cm)High 154 in (391 cm)
Overall Length is above the typical figure.
Overall Width
Average
49.3 in. (125 cm)
Low 45 in (114 cm)Typical 53.2 in (135 cm)High 80.3 in (204 cm)
Overall Width is close to the typical figure.
Ground Clearance
Low
4.5 in. (11 cm)
Low 3.3 in (8.38 cm)Typical 6.34 in (16.1 cm)High 9 in (22.9 cm)
Ground Clearance is well below the typical figure.
Visual overview
Key measurements
Overall size
The main published dimensions shown together at a glance.
Working dimensions
Useful working and clearance measurements shown side by side.
Measurements
Related measurements grouped for faster scanning.
Overview
Model information
| Manufacturer | Club Car |
|---|---|
| Model | Carryall 6 |
| Category | Golf Cart |
| Model year / production | 2003 |
Full specifications
Technical details
Performance
Tire Pressure30-34 psi (2.07-2.34 Bars)
Forward Speed14-16 mph (23-26 km/h)
Torque ConverterAutomatic, variable speed, dry type
Dimensions
Overall Length134 in. (340 cm)
Overall Width49.3 in. (125 cm)
Ground Clearance4.5 in. (11 cm)
Wheelbase98.5 in. (250 cm)
Curb Clearance Circle24 ft.-8 in. (752 cm)
Overall Height48 in. (122 cm)
Intersecting Aisle Clearance89.8 in. (228 cm)
Floorboard Height11.8 in. (30 cm)
Load Bed Height27 in. (69 cm)
Seat Height30 in. (76 cm)
Turning Radius Per SAE J 695144 in. (366 cm)
Capacity & weight
Fuel SystemSide draft carburetor with float bowl, fixed jets, fuel filter, and impulse fuel pump
Fuel Tank Capacity7 gallons (26.5 liters)
Dry Weight893 lb. (405 kg)
Vehicle Rated Capacity1500 lb. (680 kg)
Standard Seating Capacity2
Unitized Transaxle Capacity27 oz. (.8 liters)
Engine Crankcase Capacity Without Filter32 oz. (.95 liters)
Engine Crankcase Capacity With Filter38 oz. (1.12 liters)
Trailer Load Rating2000 lb. (909 kg)
Engine & drivetrain
DrivetrainFully synchronized forward and reverse with neutral (11.8:1 forward, 17.1:1 reverse)
Engine4 cycle, OHV, 351 cc, 11 hp rated, single cylinder, air cooled, with pressure lubrication system
Setup & fitment
Tires18 x 8.5 – 8 tubeless, 6 ply rated load range front and rear
Other specifications
IgnitionTransistor electronic ignition with electronic RPM limiter
BrakesMechanical brake cable system to manually adjust drum brakes on all four wheels with automatic-release park brake
SteeringSelf-adjusting rack and pinion
Electrical System12 volt, 500 cca at 0 °F (-17.8 °C), 650 at 32 °F (0 °C), 105 minute reserve capacity and 35 amp charging capacity
SuspensionFront and rear multi-leaf springs with dual hydraulic shocks
Frame/chassisTwin I-Beam welded aluminum
Front Wheel Tread34.5 in. (88 cm)
Rear Wheel Tread38.5 in. (98 cm)
Battery Type12-volt, low-maintenance battery
GovernorAutomatic ground speed sensing, internally geared in unitized transaxle
Side and Rear BodyAll aluminum
Front BodyArmorFlex
Front Body FinishMatched paint finish over molded-in color