Callaway X Forged Irons Lie Angle Chart

The Callaway X Forged Irons uses a 61° lie-angle reference.

Callaway Dynamic Lie Angle Guide

Irons • Released 2018

61°Lie reference

5-iron lie 61°Dynamic baseline

36–38.5 inPlaying length

Fitter bendingAdjustment status

X Forged lie-angle fingerprint

61°Lie reference

36–38.5 inPlaying length

Single specLie step pattern

Fitter bendingAdjustment status

What stands out about the X Forged lie setup?

The supplied specification gives this model a 61° lie reference.

Higher-loft short irons are more directionally sensitive to the same lie error, so check the fit through the set instead of relying on only one club.

Any lie change should be made by a qualified fitter with a loft-and-lie machine.

Lie angle reference

Standard lie	61°

X Forged directional effect from a 1° lie error

Geometric face-plane direction estimate using this model’s listed lofts. It is not predicted curvature or yards offline.

standard set

0.05°

4-iron

0.45°

5-iron

0.51°

6-iron

0.58°

7-iron

0.67°

8-iron

0.78°

9-iron

0.90°

Most lie-sensitive listed club: 9-iron at about 42° loft — roughly 0.90° of face-plane direction change from a 1° lie error.

Dynamic lie test for the Callaway X Forged 5-iron lie

62°1° upright test

Test only if the head is safe to bend and dynamic evidence points upright.

61°Factory baseline

Record strike and start direction before changing anything.

60°1° flat test

Keep setup and ball position consistent so the comparison is meaningful.

Right-handed reference: too upright tends to bias start left; too flat tends to bias start right. Reverse that wording for a left-handed player.

Should the Callaway X Forged be more upright or flatter?

Test more upright when…

Toe is consistently down at impact
Centred shots start right despite stable delivery

Test flatter when…

Heel is consistently down at impact
Centred shots start left despite stable delivery

Do not change lie just because…

Strike pattern is inconsistent
Playing length or face/path is the real issue

Playing length reference

Club / head	Length
4-iron	38.5 in
5-iron	38 in
6-iron	37.5 in
7-iron	37 in
8-iron	36.5 in
9-iron	36 in

Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one correction across the family.

Verify the exact Callaway specification before changing lie angle

Dynamic lie changes with delivery, shaft deflection, playing length and setup. If a Callaway wood or hybrid is adjustable, use only the documented hosel positions for that exact head. For irons, use a qualified club fitter before bending. Visit Callaway Golf.