The Callaway Super Hybrid uses an adjustable hosel. Factory loft coverage is 18°–23°. The hero card uses compact ranges so the detailed per-club specs stay readable farther down the page.
Callaway Hybrid Adjustment Guide
Super Hybrid
Callaway adjustable OptiFit hosel • 2020
8 combinationsHosel settings
18°–23°Factory loft range
57.5°–58.5°Factory lie range
WrenchAdjustment method
Hosel settings
| -1 | 1° lower than stated loft |
|---|---|
| S | Stated loft |
| +1 | 1° above stated loft |
| +2 | 2° above stated loft |
| N | Neutral lie |
| D | More upright/draw lie |
Check strike before changing the club
| High face | Often raises launch and lowers spin. Do not keep raising the tee if flight is already high. |
|---|---|
| Low face | Often lowers launch and adds spin. Raise tee height slightly before changing loft. |
| Heel | Can add fade/slice gear effect. Improve centred contact before adding draw bias. |
| Toe | Can add draw/hook gear effect. Check strike before adding fade bias. |
How to adjust
- Use the correct Callaway torque wrench.
- Loosen the hosel screw counter-clockwise until the head releases.
- Rotate to a valid setting for this exact hosel generation.
- Fully reseat and align the head before tightening.
- Tighten only until the torque wrench clicks.
Factory specs
| Loft specs | 2H:18°; 3H:20°; 4H:23°; additional spec not reliably published |
|---|---|
| Lie specs | 2H:57.5°; 3H:58°; 4H:58.5°; additional spec not reliably published |
Disclaimer: Hosel systems, adjustable lofts and removable weights can vary by loft, handedness, model year and regional configuration. Before loosening any screw, confirm the exact settings and compatible wrench in official Callaway documentation for your exact club.