The Callaway Steelhead XR Fairway Wood lie angles run from 56°–58°, with the listed heads spanning 56° to 58°.
Fairway Wood • Released 2017
Steelhead XR Fairway lie-angle fingerprint
What stands out about the Steelhead XR Fairway lie setup?
The Steelhead XR Fairway runs from 56° at the 3W to 58° at the 9W.
Lie steps vary from 0.5° to 1°, so the progression is not perfectly uniform.
There is 1 repeated lie value.
For dynamic fitting, 5W at 56.5° is the best central reference.
For this fairway wood, lie is mainly a strike, sole-contact and address-fit variable; face angle and face-to-path still dominate large directional misses.
The supplied specs do not document a user-adjustable lie setting. Check the exact Callaway head before assuming it is adjustable or bendable.
Factory lie angle chart
| Club / head | Lie | Step | Pattern |
|---|---|---|---|
| 3W | 56° | — | Starting lie |
| 5W | 56.5° | +0.5° | Typical step |
| Heavenwood | 57° | +0.5° | Typical step |
| 7W | 57° | 0° | Same lie |
| 9W | 58° | +1° | Larger step |
Lie progression visual
Steelhead XR Fairway directional effect from a 1° lie error
Should the Callaway Steelhead XR Fairway be more upright or flatter?
A more upright fit may help when…
- A fitter confirms the current head fits too flat dynamically
- Another factory build gives better centre contact
A flatter fit may help when…
- A fitter confirms the current head fits too upright dynamically
- Another factory build gives better centre contact
Do not change lie just because…
- You plan to bend a wood / hybrid without model-specific approval
- You have no repeatable strike baseline
Playing length reference
| Club / head | Length |
|---|---|
| 3W | 43.25 in |
| 5W | 42.75 in |
| Heavenwood | 43 in |
| 7W | 42.25 in |
| 9W | 41.75 in |
Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one correction across the family.
Dynamic lie changes with delivery, shaft deflection, playing length and setup. If a Callaway wood or hybrid is adjustable, use only the documented hosel positions for that exact head. For irons, use a qualified club fitter before bending. Visit Callaway Golf.