The Callaway Rogue driver is offered in 3 listed factory lofts from 9° to 13.5°, covering a 4.5° span. The 9° head is the lowest-loft starting point, while 13.5° adds 4.5° of static loft.
Rogue Driver Relative Loft Map
These bars compare the listed factory lofts relative to each other inside this model. They are not measured launch-monitor outputs. The goal is to show the practical starting-point difference between the lower and higher heads.
Rogue Driver Launch, Spin & Trajectory Snapshot
These color bars show the relative tendencies within this model. Loft usually moves launch the most, trajectory close behind, and spin more conservatively because actual spin also depends heavily on head design, CG and strike.
Low
Lower
Penetrating
Mid
Mid
Balanced
High
Higher
Higher
How to use it: use the lower-loft heads if you want a flatter, stronger starting point. Move higher if you need easier launch, with trajectory usually moving along with loft and spin shown a bit more conservatively.
Loft Spread
The listed factory choices cover 4.5°, from 9° to 13.5°.
Choice Spacing
Adjacent gaps range from 1.5° to 3°, with a median step of 2.25°.
9° vs 13.5°
The 13.5° head has 4.5° more static loft than the 9° head. That is the cleanest factory-head comparison before fitting the rest of the setup.
Rogue vs Other Callaway Driver Lofts
This comparison uses each model’s lowest listed factory loft, so the numbers are being compared on the same basis.
| Model | Reference | Loft | Difference |
|---|---|---|---|
| Rogue | 9° head | 9° | This model |
| Big Bertha Fusion | 9° head | 9° | Same lowest loft |
| Big Bertha V Series | 9° head | 9° | Same lowest loft |
| Great Big Bertha Epic | 9° head | 9° | Same lowest loft |
| X2 Hot | 9° head | 9° | Same lowest loft |
How Each Rogue Driver Loft Changes the Starting Point
| Club | Loft | What it means |
|---|---|---|
| 9° head | 9° | This is the lowest-loft factory head and the lower-launch starting point within this model’s listed range. Actual ball flight still depends heavily on delivered loft and strike. |
| 10.5° head | 10.5° | This sits between the lowest and highest factory heads and provides a middle launch starting point. Actual ball flight still depends heavily on delivered loft and strike. |
| 13.5° head | 13.5° | This is the highest-loft factory head and the higher-launch starting point within this model’s listed range. Actual ball flight still depends heavily on delivered loft and strike. |
Static factory loft is the starting point, not the final ball flight. Delivered loft, strike location and OptiFit setting can all move launch and spin.
Callaway Rogue Loft FAQs
What lofts does the Callaway Rogue come in?
The listed factory lofts are 9°, 10.5° and 13.5°.
What is the loft range of the Rogue?
It runs from 9° to 13.5°, a 4.5° total span.
What is the typical factory loft step?
The median adjacent step is 2.25°.
Which Rogue factory loft should launch highest?
The 13.5° head has the most static loft and should generally start higher, all else equal.
Is the lowest-loft Rogue automatically the longest?
No. Too little loft can reduce carry if launch gets too low. The best loft is the one that produces the strongest launch, spin and strike combination for the player.
Spec & fitting disclaimer: Loft availability and OptiFit compatibility can vary by year, region, handedness or component setup. Verify the exact club with Callaway’s official documentation before making an adjustment or ordering a replacement.