The Callaway REVA RISE Hybrid lie angles run from 59.5°–60.5°, with the listed heads spanning 59.5° to 60.5°. The supplied lie data is marked as estimated, so use it as a reference and verify the exact head before any permanent change.
Hybrid • Released 2025
REVA RISE Hybrid lie-angle fingerprint
What stands out about the REVA RISE Hybrid lie setup?
The REVA RISE Hybrid runs from 59.5° at the 4H to 60.5° at the 6H.
Every meaningful lie step is 0.5°, giving this model a very consistent progression.
For dynamic fitting, 4H at 59.5° is the best central reference.
The supplied lie values are marked as estimated, so treat them as a reference rather than confirmed factory measurements.
For this hybrid / utility head, lie can influence start direction and strike more than on a driver, but the head should not automatically be treated as bendable.
The supplied specs do not document a user-adjustable lie setting. Check the exact Callaway head before assuming it is adjustable or bendable.
Estimated lie angle reference
| Club / head | Lie | Step | Pattern |
|---|---|---|---|
| 4H | 59.5° | — | Starting lie |
| 5H | 60° | +0.5° | Typical step |
| 6H | 60.5° | +0.5° | Typical step |
Estimated lie progression visual
REVA RISE Hybrid directional effect from a 1° lie error
Should the Callaway REVA RISE Hybrid be more upright or flatter?
A more upright fit may help when…
- A fitter confirms the current head fits too flat dynamically
- Another factory build gives better centre contact
A flatter fit may help when…
- A fitter confirms the current head fits too upright dynamically
- Another factory build gives better centre contact
Do not change lie just because…
- You plan to bend a wood / hybrid without model-specific approval
- You have no repeatable strike baseline
Playing length reference
| Club / head | Length |
|---|---|
| 4H | 38.5 in |
| 5H | 38 in |
| 6H | 37.5 in |
Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one correction across the family.
Dynamic lie changes with delivery, shaft deflection, playing length and setup. If a Callaway wood or hybrid is adjustable, use only the documented hosel positions for that exact head. For irons, use a qualified club fitter before bending. Visit Callaway Golf.