Callaway Elyte X Loft Chart

The Callaway Elyte X iron lineup runs from 18° to 54° across 10 factory loft options. The 7-iron is 28° and the highest-lofted option is the sand wedge at 54°.

Callaway Iron Loft Guide

Elyte X Lofts & Loft Chart

Factory loft map and model-specific gap analysis

28°7-Iron Loft
18°–54°Factory Loft Range
Median Loft Gap
9.7/10Loft Strength Score

Elyte X Loft Chart

Club Loft Loft Gap Gap Read
4i 18°
5i 21° Tighter than model median
6i 24° Tighter than model median
7i 28° Near model median
8i 32° Near model median
9i 36° Near model median
PW 41° Wider than model median
AW 46° Wider than model median
GW 50° Near model median
SW 54° Near model median

What stands out about the Elyte X lofts?

Loft profile: The 7-iron is 28°, which is very strong relative to comparable Callaway irons in this database.
Gap pattern: Median gap is 4°. Tightest: 4i→5i (3°), 5i→6i (3°). Widest: 9i→PW (5°), PW→AW (5°).

Elyte X loft progression

4i 18° → 5i 21° → 6i 24° → 7i 28° → 8i 32° → 9i 36° → PW 41° → AW 46° → GW 50° → SW 54°

The 28° 7-iron is the clearest single reference point for how this set is lofted. Loft helps explain distance structure, but it does not by itself predict launch, spin or carry.

Where are the tightest and widest loft gaps?

The tightest static gap is 3° between 4-iron and 5-iron. The widest is 5° between 9-iron and pitching wedge. Those are the first transitions worth checking if real carry gaps look compressed or stretched.

Elyte X vs other Callaway iron lofts

This comparison uses the same benchmark club where possible and deliberately shows nearby lower, similar and higher lofts when available.

Callaway Model Benchmark Club Loft Difference
Elyte X 7i 28° This model
Rogue ST Max 7i 27.5° 0.5° lower loft
Great Big Bertha 23 7i 28° Same loft
Paradym Ai Smoke 7i 28° Same loft
Rogue ST Max OS 7i 28.5° 0.5° higher loft
Big Bertha 23 7i 27° 1° lower loft

What traditional iron lofts are the Elyte X closest to?

This is a static-loft comparison only; it does not mean the clubs launch, spin or carry the same.

Callaway Club Actual Loft Closest Traditional Loft
4-iron 18° 3-iron (~21°)
5-iron 21° 3-iron (~21°)
6-iron 24° 4-iron (~24°)
7-iron 28° 5-iron (~27°)
8-iron 32° 6-iron (~31°)
9-iron 36° 7-iron (~35°)

Which Elyte X club has each loft?

  • 18° = 4-iron.
  • 21° = 5-iron.
  • 24° = 6-iron.
  • 28° = 7-iron.
  • 32° = 8-iron.
  • 36° = 9-iron.
  • 41° = pitching wedge.
  • 46° = approach wedge.
  • 50° = gap wedge.
  • 54° = sand wedge.

Individual Elyte X loft answers

What loft is the Callaway Elyte X 4-iron?

The Elyte X 4-iron is 18°. It is the lowest-lofted option in this model.

What loft is the Callaway Elyte X 5-iron?

The Elyte X 5-iron is 21°. It has 3° more loft than the 4-iron.

What loft is the Callaway Elyte X 6-iron?

The Elyte X 6-iron is 24°. It has 3° more loft than the 5-iron.

What loft is the Callaway Elyte X 7-iron?

The Elyte X 7-iron is 28°. It has 4° more loft than the 6-iron.

What loft is the Callaway Elyte X 8-iron?

The Elyte X 8-iron is 32°. It has 4° more loft than the 7-iron.

What loft is the Callaway Elyte X 9-iron?

The Elyte X 9-iron is 36°. It has 4° more loft than the 8-iron.

What loft is the Callaway Elyte X pitching wedge?

The Elyte X pitching wedge is 41°. It has 5° more loft than the 9-iron.

What loft is the Callaway Elyte X approach wedge?

The Elyte X approach wedge is 46°. It has 5° more loft than the pitching wedge.

What loft is the Callaway Elyte X gap wedge?

The Elyte X gap wedge is 50°. It has 4° more loft than the approach wedge.

What loft is the Callaway Elyte X sand wedge?

The Elyte X sand wedge is 54°. It has 4° more loft than the gap wedge.

Elyte X Loft Intelligence

These derived specs show how the numbered irons are structured beyond the raw loft chart.

7-ironBenchmark Iron
28° loft
7° strongerTraditional Loft Shift
vs ~35° traditional 7i
4° medianNumbered-Iron Gap
3.6° average
66/100Loft Consistency
Moderately varied
Strength fingerprint: The 7-iron is 28°. In static loft it is closest to a traditional 5-iron at about 27°.

Iron-only spacing: The tightest numbered-iron gap is 3° from 4i to 5i; the widest is 4° from 6i to 7i.

Loft Consistency Score: 66/100. This derived score measures variation in numbered-iron loft gaps; 100 means perfectly even spacing.

How the Elyte X lofts affect the shot

Loft is one of the biggest inputs into launch, trajectory, rollout and stopping power. The table below translates each Elyte X loft into its likely loft-only shot tendency.

18°Lowest-Loft Shot
Low launch • Higher roll
54°Highest-Loft Shot
Very high launch • Maximum stopping
36°Flight-Window Change
Low → Very high launch tendency
10 loftsShot Bias
Distance → control as loft increases
Model shot profile: Across the 36° loft span, the model moves from the 4-iron at 18° (low launch / higher roll tendency) to the sand wedge at 54° (very high launch / maximum stopping tendency). Head design, shaft, speed and strike can move the actual result.
Club Loft Launch Tendency Flight Window Roll Tendency Stopping Tendency Loft-Driven Role
4i 18° Low Penetrating Higher Low Long-iron distance slot
5i 21° Low–mid Strong Moderate–high Low–moderate Long-iron slot
6i 24° Low–mid Strong Moderate–high Low–moderate Long-iron slot
7i 28° Mid–low Strong / flat Moderate Moderate Distance-biased mid/long iron
8i 32° Mid Balanced Moderate Moderate–high Mid-iron scoring transition
9i 36° Mid–high Higher Low–moderate High Control-oriented mid/short iron
PW 41° High High / steep Low Very high Scoring-iron / pitching slot
AW 46° Very high Very high / steep Very low Very high Gap-control / scoring slot
GW 50° Very high Very high / steep Very low Very high Gap-control / scoring slot
SW 54° Very high Maximum-height / steep Minimal Maximum Short-game / maximum-control slot

What the loft gaps mean for shot separation

  • 4-iron → 5-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
  • 5-iron → 6-iron: 3° — Normal-to-moderate loft step — usually a balanced transition.
  • 6-iron → 7-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • 7-iron → 8-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • 8-iron → 9-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • 9-iron → pitching wedge: 5° — Wider loft step — worth checking carry distance for a larger jump.
  • pitching wedge → approach wedge: 5° — Wider loft step — worth checking carry distance for a larger jump.
  • approach wedge → gap wedge: 4° — Normal-to-moderate loft step — usually a balanced transition.
  • gap wedge → sand wedge: 4° — Normal-to-moderate loft step — usually a balanced transition.

Iron note: Stronger lofts generally lower the launch/flight window and increase distance potential, while weaker lofts generally raise flight and stopping power. Modern iron head design can counteract some of that, so this is a loft-only tendency rather than a measured launch result.

Where the set changes from distance to control

By loft alone, the distance-biased part of the numbered set extends through roughly the 7-iron at 28°. By the 9-iron at 36°, the loft profile is clearly moving toward higher launch, steeper descent and stronger green-holding tendency.

Elyte X distance-to-control map

Part of lineup Reference club Loft What the loft favors
Distance end 4-iron 18° Low launch, higher roll, stronger distance bias
Middle 9-iron 36° Mid–high launch, more balanced carry/control role
Control end sand wedge 54° Very high launch, maximum stopping tendency, stronger control bias

Spec note: Factory lofts can vary by model year, region, handedness or special configuration. Verify an exact club against Callaway documentation when a single degree matters for fitting, replacement or bending.

Ernie

Ernie loves documenting interesting facts about golf.

Recent Posts