The Callaway Elyte Triple Diamond Fairway fairway wood lineup runs from 15° to 18° across 2 factory loft options. The 3-wood is 15° and the highest-lofted option is the 5-wood at 18°.
Elyte Triple Diamond Fairway Lofts & Loft Chart
Factory loft map and model-specific gap analysis
Elyte Triple Diamond Fairway Loft Chart
| Club | Loft | Loft Gap | Gap Read |
|---|---|---|---|
| 3-wood | 15° | — | — |
| 5-wood | 18° | 3° | Near model median |
What stands out about the Elyte Triple Diamond Fairway lofts?
Gap pattern: Every adjacent factory loft is separated by 3°.
Elyte Triple Diamond Fairway loft progression
The loft map is ordered by actual static loft, which matters for named options such as Heavenwood that do not always sit numerically between the wood labels around them. Head shape, centre of gravity and shaft length can still make equal-loft fairway woods fly differently.
Where are the tightest and widest loft gaps?
Every adjacent factory loft is separated by 3°. That is a very even static progression, although equal loft gaps do not guarantee equal yardage gaps.
Elyte Triple Diamond Fairway vs other Callaway fairway wood lofts
This comparison uses the same benchmark club where possible and deliberately shows nearby lower, similar and higher lofts when available.
| Callaway Model | Benchmark Club | Loft | Difference |
|---|---|---|---|
| Elyte Triple Diamond Fairway | 3-wood | 15° | This model |
| Paradym Triple Diamond Fairway | T# | 13.5° | 1.5° lower loft |
| Epic Flash Fairway | Standard | 15° | Same loft |
| Hawk Eye Fairway | 3-wood | 15° | Same loft |
| Women’s Edge Fairway | 3-Wood | 16° | 1° higher loft |
| Elyte Fairway | 3HL | 16.5° | 1.5° higher loft |
Which Elyte Triple Diamond Fairway club has each loft?
- 15° = 3-wood.
- 18° = 5-wood.
Individual Elyte Triple Diamond Fairway loft answers
What loft is the Callaway Elyte Triple Diamond Fairway 3-wood?
The Elyte Triple Diamond Fairway 3-wood is 15°. It is the lowest-lofted option in this model.
What loft is the Callaway Elyte Triple Diamond Fairway 5-wood?
The Elyte Triple Diamond Fairway 5-wood is 18°. It has 3° more loft than the 3-wood.
Elyte Triple Diamond Fairway Loft Intelligence
These derived specs show how the fairway-wood lineup is spaced and where the loft structure changes.
15° to 18°
between adjacent lofts
Single configuration
5-wood
Coverage: The family spans 3° from the 3-wood to the 5-wood.
How the Elyte Triple Diamond Fairway lofts affect the shot
Loft is one of the biggest inputs into launch, trajectory, rollout and stopping power. The table below translates each Elyte Triple Diamond Fairway loft into its likely loft-only shot tendency.
Low–mid launch • Moderate–high roll
Mid launch • Moderate stopping
Low–mid → Mid launch tendency
Distance → control as loft increases
| Club | Loft | Launch Tendency | Flight Window | Roll Tendency | Stopping Tendency | Loft-Driven Role |
|---|---|---|---|---|---|---|
| 3-wood | 15° | Low–mid | Strong / penetrating | Moderate–high | Low–moderate | Distance-first fairway slot |
| 5-wood | 18° | Mid | Balanced | Moderate | Moderate | Versatile distance / approach slot |
What the loft gaps mean for shot separation
- 3-wood → 5-wood: 3° — Moderate loft step — a conventional separation on paper.
Fairway-wood note: Lower-loft woods are biased toward speed, flatter flight and more rollout; higher-loft woods trade some distance for easier launch, steeper descent and more stopping power. A high-loft fairway can therefore behave very differently from a hybrid with the same number on the sole.
Elyte Triple Diamond Fairway distance-to-control map
| Part of lineup | Reference club | Loft | What the loft favors |
|---|---|---|---|
| Distance end | 3-wood | 15° | Low–mid launch, moderate–high roll, stronger distance bias |
| Middle | 5-wood | 18° | Mid launch, more balanced carry/control role |
| Control end | 5-wood | 18° | Mid launch, moderate stopping tendency, stronger control bias |
Spec note: Factory lofts can vary by model year, region, handedness or special configuration. Verify an exact club against Callaway documentation when a single degree matters for fitting, replacement or bending.