The Callaway Edge Irons lie angles run from 62.5°–64°, with the listed heads spanning 62.5° to 64°.
Irons • Released 2014
Edge lie-angle fingerprint
What stands out about the Edge lie setup?
The Edge runs from 62.5° at the 7-iron to 64° at the SW.
Every meaningful lie step is 0.5°, giving this model a very consistent progression.
There are 2 repeated lie values.
For dynamic fitting, 7-iron at 62.5° is the best central reference.
Higher-loft short irons are more directionally sensitive to the same lie error, so check the fit through the set instead of relying on only one club.
Any lie change should be made by a qualified fitter with a loft-and-lie machine.
Factory lie angle chart
| Club / head | Lie | Step | Pattern |
|---|---|---|---|
| 7-iron | 62.5° | — | Starting lie |
| 8-iron | 63° | +0.5° | Typical step |
| 9-iron | 63.5° | +0.5° | Typical step |
| PW | 64° | +0.5° | Typical step |
| AW | 64° | 0° | Same lie |
| SW | 64° | 0° | Same lie |
Lie progression visual
Edge directional effect from a 1° lie error
Dynamic lie test for the Callaway Edge 7-iron
Test only if the head is safe to bend and dynamic evidence points upright.
Record strike and start direction before changing anything.
Keep setup and ball position consistent so the comparison is meaningful.
Should the Callaway Edge be more upright or flatter?
Test more upright when…
- Toe is consistently down at impact
- Centred shots start right despite stable delivery
Test flatter when…
- Heel is consistently down at impact
- Centred shots start left despite stable delivery
Do not change lie just because…
- Strike pattern is inconsistent
- Playing length or face/path is the real issue
Playing length reference
| Club / head | Length |
|---|---|
| 7-iron | 37 in |
| 8-iron | 36.5 in |
| 9-iron | 36 in |
| PW | 35.75 in |
| AW | 35.5 in |
| SW | 35.25 in |
Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one correction across the family.
Dynamic lie changes with delivery, shaft deflection, playing length and setup. If a Callaway wood or hybrid is adjustable, use only the documented hosel positions for that exact head. For irons, use a qualified club fitter before bending. Visit Callaway Golf.