The Callaway Edge iron lineup runs from 32° to 55° across 6 factory loft options. The 7-iron is 32° and the highest-lofted option is the sand wedge at 55°.
Edge Lofts & Loft Chart
Factory loft map and model-specific gap analysis
Edge Loft Chart
| Club | Loft | Loft Gap | Gap Read |
|---|---|---|---|
| 7i | 32° | — | — |
| 8i | 36° | 4° | Tighter than model median |
| 9i | 40° | 4° | Tighter than model median |
| PW | 45° | 5° | Near model median |
| AW | 50° | 5° | Near model median |
| SW | 55° | 5° | Near model median |
What stands out about the Edge lofts?
Gap pattern: Median gap is 5°. Tightest: 7i→8i (4°), 8i→9i (4°). Widest: 9i→PW (5°), PW→AW (5°), AW→SW (5°).
Edge loft progression
The 32° 7-iron is the clearest single reference point for how this set is lofted. Loft helps explain distance structure, but it does not by itself predict launch, spin or carry.
Where are the tightest and widest loft gaps?
The tightest static gap is 4° between 7-iron and 8-iron. The widest is 5° between 9-iron and pitching wedge. Those are the first transitions worth checking if real carry gaps look compressed or stretched.
Edge vs other Callaway iron lofts
This comparison uses the same benchmark club where possible and deliberately shows nearby lower, similar and higher lofts when available.
| Callaway Model | Benchmark Club | Loft | Difference |
|---|---|---|---|
| Edge | 7i | 32° | This model |
| Rogue ST Max OS Lite | 7i | 31.5° | 0.5° lower loft |
| Fusion Wide Sole | 7i | 32° | Same loft |
| RAZR X Black | 7i | 32° | Same loft |
| Apex MB Raw | 7i | 33° | 1° higher loft |
| Apex Ai150 | 7i | 31° | 1° lower loft |
What traditional iron lofts are the Edge closest to?
This is a static-loft comparison only; it does not mean the clubs launch, spin or carry the same.
| Callaway Club | Actual Loft | Closest Traditional Loft |
|---|---|---|
| 7-iron | 32° | 6-iron (~31°) |
| 8-iron | 36° | 7-iron (~35°) |
| 9-iron | 40° | 8-iron (~39°) |
Which Edge club has each loft?
- 32° = 7-iron.
- 36° = 8-iron.
- 40° = 9-iron.
- 45° = pitching wedge.
- 50° = approach wedge.
- 55° = sand wedge.
Individual Edge loft answers
What loft is the Callaway Edge 7-iron?
The Edge 7-iron is 32°. It is the lowest-lofted option in this model.
What loft is the Callaway Edge 8-iron?
The Edge 8-iron is 36°. It has 4° more loft than the 7-iron.
What loft is the Callaway Edge 9-iron?
The Edge 9-iron is 40°. It has 4° more loft than the 8-iron.
What loft is the Callaway Edge pitching wedge?
The Edge pitching wedge is 45°. It has 5° more loft than the 9-iron.
What loft is the Callaway Edge approach wedge?
The Edge approach wedge is 50°. It has 5° more loft than the pitching wedge.
What loft is the Callaway Edge sand wedge?
The Edge sand wedge is 55°. It has 5° more loft than the approach wedge.
Edge Loft Intelligence
These derived specs show how the numbered irons are structured beyond the raw loft chart.
32° loft
vs ~35° traditional 7i
4° average
Very even
Iron-only spacing: Every numbered-iron transition is 4°, so the numbered irons use uniform static-loft spacing.
Loft Consistency Score: 100/100. This derived score measures variation in numbered-iron loft gaps; 100 means perfectly even spacing.
How the Edge lofts affect the shot
Loft is one of the biggest inputs into launch, trajectory, rollout and stopping power. The table below translates each Edge loft into its likely loft-only shot tendency.
Mid launch • Moderate roll
Very high launch • Maximum stopping
Mid → Very high launch tendency
Distance → control as loft increases
| Club | Loft | Launch Tendency | Flight Window | Roll Tendency | Stopping Tendency | Loft-Driven Role |
|---|---|---|---|---|---|---|
| 7i | 32° | Mid | Balanced | Moderate | Moderate–high | Mid-iron scoring transition |
| 8i | 36° | Mid–high | Higher | Low–moderate | High | Control-oriented mid/short iron |
| 9i | 40° | High | High / soft | Lower | High | Short-iron approach slot |
| PW | 45° | High | High / steep | Low | Very high | Scoring-iron / pitching slot |
| AW | 50° | Very high | Very high / steep | Very low | Very high | Gap-control / scoring slot |
| SW | 55° | Very high | Maximum-height / steep | Minimal | Maximum | Short-game / maximum-control slot |
What the loft gaps mean for shot separation
- 7-iron → 8-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
- 8-iron → 9-iron: 4° — Normal-to-moderate loft step — usually a balanced transition.
- 9-iron → pitching wedge: 5° — Wider loft step — worth checking carry distance for a larger jump.
- pitching wedge → approach wedge: 5° — Wider loft step — worth checking carry distance for a larger jump.
- approach wedge → sand wedge: 5° — Wider loft step — worth checking carry distance for a larger jump.
Iron note: Stronger lofts generally lower the launch/flight window and increase distance potential, while weaker lofts generally raise flight and stopping power. Modern iron head design can counteract some of that, so this is a loft-only tendency rather than a measured launch result.
Edge distance-to-control map
| Part of lineup | Reference club | Loft | What the loft favors |
|---|---|---|---|
| Distance end | 7-iron | 32° | Mid launch, moderate roll, stronger distance bias |
| Middle | pitching wedge | 45° | High launch, more balanced carry/control role |
| Control end | sand wedge | 55° | Very high launch, maximum stopping tendency, stronger control bias |
Spec note: Factory lofts can vary by model year, region, handedness or special configuration. Verify an exact club against Callaway documentation when a single degree matters for fitting, replacement or bending.