The Callaway Big Bertha OS Hybrid lie angles run from 59°–62°, with the listed heads spanning 59° to 62°.
Hybrid • Released 2016
Big Bertha OS Hybrid lie-angle fingerprint
What stands out about the Big Bertha OS Hybrid lie setup?
The Big Bertha OS Hybrid runs from 59° at the 3H to 62° at the 7H.
Lie steps vary from 0.7° to 0.8°, so the progression is not perfectly uniform.
For dynamic fitting, 4H at 59.8° is the best central reference.
For this hybrid / utility head, lie can influence start direction and strike more than on a driver, but the head should not automatically be treated as bendable.
The supplied specs do not document a user-adjustable lie setting. Check the exact Callaway head before assuming it is adjustable or bendable.
Factory lie angle chart
| Club / head | Lie | Step | Pattern |
|---|---|---|---|
| 3H | 59° | — | Starting lie |
| 4H | 59.8° | +0.8° | Typical step |
| 5H | 60.5° | +0.7° | Typical step |
| 6H | 61.3° | +0.8° | Typical step |
| 7H | 62° | +0.7° | Typical step |
Lie progression visual
Big Bertha OS Hybrid directional effect from a 1° lie error
Should the Callaway Big Bertha OS Hybrid be more upright or flatter?
A more upright fit may help when…
- A fitter confirms the current head fits too flat dynamically
- Another factory build gives better centre contact
A flatter fit may help when…
- A fitter confirms the current head fits too upright dynamically
- Another factory build gives better centre contact
Do not change lie just because…
- You plan to bend a wood / hybrid without model-specific approval
- You have no repeatable strike baseline
Playing length reference
| Club / head | Length |
|---|---|
| 3H | 39.75 in |
| 4H | 39.25 in |
| 5H | 38.75 in |
| 6H | 38.25 in |
| 7H | 37.75 in |
Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one correction across the family.
Dynamic lie changes with delivery, shaft deflection, playing length and setup. If a Callaway wood or hybrid is adjustable, use only the documented hosel positions for that exact head. For irons, use a qualified club fitter before bending. Visit Callaway Golf.