Callaway Apex MB Irons Lie Angle Chart

The Callaway Apex MB Irons lie angles run from 59.5°–63.5°, with the listed heads spanning 59.5° to 63.5°.

Callaway Dynamic Lie Angle Guide

Irons • Released 2018

59.5°–63.5°Lie reference
7-iron 62°Dynamic baseline
35.75–39.5 inPlaying length
Fitter bendingAdjustment status

Apex MB lie-angle fingerprint

59.5°–63.5°Lie reference
35.75–39.5 inPlaying length
0.5°Lie step pattern
Fitter bendingAdjustment status

What stands out about the Apex MB lie setup?

The Apex MB runs from 59.5° at the 2i to 63.5° at the PW.

Every meaningful lie step is 0.5°, giving this model a very consistent progression.

For dynamic fitting, 7-iron at 62° is the best central reference.

Higher-loft short irons are more directionally sensitive to the same lie error, so check the fit through the set instead of relying on only one club.

Any lie change should be made by a qualified fitter with a loft-and-lie machine.

Factory lie angle chart

Club / head Lie Step Pattern
2i 59.5° Starting lie
3-iron 60° +0.5° Typical step
4-iron 60.5° +0.5° Typical step
5-iron 61° +0.5° Typical step
6-iron 61.5° +0.5° Typical step
7-iron 62° +0.5° Typical step
8-iron 62.5° +0.5° Typical step
9-iron 63° +0.5° Typical step
PW 63.5° +0.5° Typical step

Lie progression visual

Listed lie angles across this exact Callaway model.
2i
59.5°
3-iron
60°
4-iron
60.5°
5-iron
61°
6-iron
61.5°
7-iron
62°
8-iron
62.5°
9-iron
63°
PW
63.5°

Apex MB directional effect from a 1° lie error

Geometric face-plane direction estimate using this model’s listed lofts. It is not predicted curvature or yards offline.
2i
0.32°
3-iron
0.38°
4-iron
0.45°
5-iron
0.51°
6-iron
0.60°
7-iron
0.70°
8-iron
0.81°
9-iron
0.93°
PW
1.07°
Most lie-sensitive listed club: PW at about 47° loft — roughly 1.07° of face-plane direction change from a 1° lie error.

Dynamic lie test for the Callaway Apex MB 7-iron

63°1° upright test

Test only if the head is safe to bend and dynamic evidence points upright.

62°Factory baseline

Record strike and start direction before changing anything.

61°1° flat test

Keep setup and ball position consistent so the comparison is meaningful.

Right-handed reference: too upright tends to bias start left; too flat tends to bias start right. Reverse that wording for a left-handed player.

Should the Callaway Apex MB be more upright or flatter?

Test more upright when…

  • Toe is consistently down at impact
  • Centred shots start right despite stable delivery

Test flatter when…

  • Heel is consistently down at impact
  • Centred shots start left despite stable delivery

Do not change lie just because…

  • Strike pattern is inconsistent
  • Playing length or face/path is the real issue

Playing length reference

Club / head Length
2i 39.5 in
3-iron 39 in
4-iron 38.5 in
5-iron 38 in
6-iron 37.5 in
7-iron 37 in
8-iron 36.5 in
9-iron 36 in
PW 35.75 in

Because these heads use different playing lengths, judge dynamic lie with the actual club being fit rather than applying one correction across the family.

Verify the exact Callaway specification before changing lie angle

Dynamic lie changes with delivery, shaft deflection, playing length and setup. If a Callaway wood or hybrid is adjustable, use only the documented hosel positions for that exact head. For irons, use a qualified club fitter before bending. Visit Callaway Golf.