Gasoline Club Car Tempo 2+2 models span EX-40 and later Kohler/ECH440 EFI generations. Identify the serial prefix/year first because the fuel-line routing changes with the engine generation.
Tempo 2+2 • Fuel pump hose routing
Tempo 2+2 fuel-line routing at a glance
Identify first
Find the exact year, engine and serial/model code.
Carbureted path
Use tank / pump / carb / pulse routing when fitted.
EFI path
Use pressurized tank-pump routing when fitted.
Order by generation
Match hose and connectors to the exact system.
How the Club Car Tempo 2+2 fuel lines are routed
Common Tempo 2+2 hose-routing mistakes
Wrong-generation diagram
The same model name can span different gasoline engines and fuel systems.
Pulse routing on an EFI cart
EFI electric pumps do not use a crankcase pulse hose.
EFI hose on an older diagram
Do not assume newer connectors, pressure ratings or module layout apply to older carbureted versions.
Missing year/serial check
Use the exact serial/model code before ordering hose, fittings or pump parts.
Tempo 2+2 fuel hose and line layout
Pump/system: EX-40 or Kohler EFI by year.
Engine/system: Gasoline generation dependent.
Routing: Earlier EX-40 gasoline routing differs from later ECH440/Kohler EFI routing; identify serial prefix/year first.
Applies to: Gasoline versions only.
Model-specific note
Club Car documentation shows gasoline Tempo 2+2 versions across EX-40 and later Kohler/ECH440 EFI generations, so there is no single universal hose layout.
Club Car Tempo 2+2 fuel hose FAQ
Does every gasoline Club Car Tempo 2+2 use the same fuel-line routing?
No. The Club Car Tempo 2+2 name spans gasoline generations, so the correct routing depends on model year, engine and fuel-system type.
How do I know which Club Car Tempo 2+2 hose diagram to use?
Identify the exact serial/model code and gasoline engine first. Then use the matching official parts or service diagram.
How is an older carbureted Club Car Tempo 2+2 typically routed?
Where a diaphragm-pump system is fitted, the usual path is tank to pump inlet, pump outlet to carburetor, plus a separate engine pulse/impulse line.
How is an EFI Club Car Tempo 2+2 routed?
An EFI version uses a tank-area electric pump with a pressurized fuel line to the injector/throttle-body system; it does not use a crankcase pulse hose.
Can I copy routing from a different-year Club Car Tempo 2+2?
Not safely without verification. Pump type, connectors, pressure rating and line routing can change even when the model name stays the same.
What should I verify before replacing Club Car Tempo 2+2 fuel hose?
Confirm the exact year/engine, fuel-system type, hose pressure rating, connector style, seals, routing clips and fuel compatibility.
Fuel-line routing, pump type, connectors and pressure requirements can vary by model year, engine and serial range. Before disconnecting or replacing any line, confirm the routing in the official owner, operator, parts or service manual for your exact Club Car Tempo 2+2. For current documentation, visit the official manufacturer website.